I see from your earlier posts that you have CF 3.00 installed and working for some time before the fault. My fault occurred on first install, I suggest that you install CF 3.02 then install the test kernel (I expect af123 will use this to create a newer mod version) you would be no worst off and...
Thanks Black Hole - Forgot about the first rule "switch it off and back on again".
@af123 - again thanks very much - everything now working with the Test Kernel.
Yes that is the problem - Guys please take it as read that I do understand what menus (I can excess) and settings (I can change) to try and resolve this issue myself. As I have mentioned (.... Any IP Address).
@af123 Re post #46 I have tested this and found that my original problem has been fixed (Thank You), but now a new problem has arisen: Webif will not accept any IP Address from the Humax Box. Sorry for swapping one problem for another.
@af123 work around was successful, as per your email:
"...... then you can install CFW3.02 and then the second update file above so you'll end up with CFW3.02 on top of the stock 1.03.12 kernel.. it will be a working CFW3 system apart from the one package that Monty mentioned."
Here is the...
Guys please take a step backwards, it's been over 30 years since I last looked at any type of programming language.
Black Hole - software I use can take a scrolling window screen shot, easier for me to use, no pasting.
OK MontysEvilTwin & af123, since I know that the SATA interface & disk...
I think it is not a disk problem, read my posts #84 & #86. The latest version of CF has changed a setting or something like that (possibly to the standard firmware). As re-installing an earlier version of CF DOES NOT correct the fault. Only by re-installing the standard firmware removes the...
I have to disagree with you Black Hole, I have my unit for 2 years which is when I installed CF and had no problems with CF updates until now. As the screen shot of WebIF proves the CF was installed correctly (file structure must be intact). Since I have no problems using previous CF, whatever...
Black Hole, with the CF installed, I can’t write/record to the HDD or read any pre-recorded files. The CF temporally makes the HDD invisible to either write to or read from, as far as I can see this can only be resolved by re-installing previous software.
What I mean by invisible:
By pressing...
Thanks for the link Black Hole, but Disk Recovery via Factory Default with newest CF does not work i.e. WebIF tells me that a HDD is not installed, as a result Telnet usage on WebIF is not available. The state and health of the HDD is NOT the issue, as stated in my previous post, backward...
Major issue with installing CF HDR FOX T2 1.03.12 mod 3.02. Every time I have installed:
1. WebIF tells me that no HDD can be found.
2. Pressing Media button on RC displays nothing on TV although I know programmes have been recorded.
3. Re-installing previous version of CF HDR FOX T2 1.03.12 mod...
Black Hole sorry for hijacking, would it be possible if a "print option" or "save as a text file option" could be added to the "Scheduled Events" task in the CF as I have a large scheduled list and would like to add some new channels. Thinking about it maybe 'save as' option using the Raw...
Hi Black Hole,
I'm new to the forum, and have come across this problem several times myself. My only solution, as with any other piece of "IT" equipment, switch it off and on again.
I see from your earlier posts that you have CF 3.00 installed and working for some time before the fault. My fault occurred on first install, I suggest that you install CF 3.02 then install the test kernel (I expect af123 will use this to create a newer mod version) you would be no worst off and...
Thanks Black Hole - Forgot about the first rule "switch it off and back on again".
@af123 - again thanks very much - everything now working with the Test Kernel.
Yes that is the problem - Guys please take it as read that I do understand what menus (I can excess) and settings (I can change) to try and resolve this issue myself. As I have mentioned (.... Any IP Address).
@af123 Re post #46 I have tested this and found that my original problem has been fixed (Thank You), but now a new problem has arisen: Webif will not accept any IP Address from the Humax Box. Sorry for swapping one problem for another.
@af123 work around was successful, as per your email:
"...... then you can install CFW3.02 and then the second update file above so you'll end up with CFW3.02 on top of the stock 1.03.12 kernel.. it will be a working CFW3 system apart from the one package that Monty mentioned."
Here is the...
Guys please take a step backwards, it's been over 30 years since I last looked at any type of programming language.
Black Hole - software I use can take a scrolling window screen shot, easier for me to use, no pasting.
OK MontysEvilTwin & af123, since I know that the SATA interface & disk...
I think it is not a disk problem, read my posts #84 & #86. The latest version of CF has changed a setting or something like that (possibly to the standard firmware). As re-installing an earlier version of CF DOES NOT correct the fault. Only by re-installing the standard firmware removes the...
I have to disagree with you Black Hole, I have my unit for 2 years which is when I installed CF and had no problems with CF updates until now. As the screen shot of WebIF proves the CF was installed correctly (file structure must be intact). Since I have no problems using previous CF, whatever...
Black Hole, with the CF installed, I can’t write/record to the HDD or read any pre-recorded files. The CF temporally makes the HDD invisible to either write to or read from, as far as I can see this can only be resolved by re-installing previous software.
What I mean by invisible:
By pressing...
Thanks for the link Black Hole, but Disk Recovery via Factory Default with newest CF does not work i.e. WebIF tells me that a HDD is not installed, as a result Telnet usage on WebIF is not available. The state and health of the HDD is NOT the issue, as stated in my previous post, backward...
Major issue with installing CF HDR FOX T2 1.03.12 mod 3.02. Every time I have installed:
1. WebIF tells me that no HDD can be found.
2. Pressing Media button on RC displays nothing on TV although I know programmes have been recorded.
3. Re-installing previous version of CF HDR FOX T2 1.03.12 mod...
Black Hole sorry for hijacking, would it be possible if a "print option" or "save as a text file option" could be added to the "Scheduled Events" task in the CF as I have a large scheduled list and would like to add some new channels. Thinking about it maybe 'save as' option using the Raw...
Hi Black Hole,
I'm new to the forum, and have come across this problem several times myself. My only solution, as with any other piece of "IT" equipment, switch it off and on again.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.