Recent content by Beavor-Bob

  1. Beavor-Bob

    No bbc red button text DTR-t2100

    Rather odd behaviour from youview - perhaps it relieves some of the overtaxed memory space? But thanks.
  2. Beavor-Bob

    No bbc red button text DTR-t2100

    Thanks for your reply Yes, fresh retune & soft update yesterday. The odd thing, if you tune to a BBC radio channel - the Text works OK, using either the text button or the red button??? Has someone messed up? The Box seems fine otherwise, picked it up at a car boot yesterday for £4 !! inc...
  3. Beavor-Bob

    No bbc red button text DTR-t2100

    On BBC1 or other BBC tv channels - but the TEXT does work via a BBC radio channel???? Is it a fault, or a quirk of BT youview...
  4. Beavor-Bob

    DTR-T1000: recovering from 'Nearly Ready'

    Further troubles (inc no video) with a T1000, were solved by replacing all the PSU capacitors. about 6 in all. The latest software, whilst not being very nice to use - is more stable I feel, than the old version. They are great boxes - when they work!!
  5. Beavor-Bob

    Humax 9150 & 9300 freezing etc - Caps replace

    As they age, these boxes are showing various fault symptoms - provided you can work safely & solder correctly, these are easily fixable. On the power supply board, there are 3 electrolytic notorious "Capxon" capacitors that fail with time. Bit surprised Humax used these rubbish caps! C21 1000uf...
  6. Beavor-Bob

    DTR-T1000: recovering from 'Nearly Ready'

    Thanks for the tip, I used a spare 2.5" 750gb drive & yes, it works fine now - I drilled a couple of holes in the top of the old 3.5" drive holder to mount it. Runs quieter too. Software upgraded as I had the Lan connected. I used the full maintenance mode to get the 2.5 hdd recognised...
  7. Beavor-Bob

    DTR-T1000: recovering from 'Nearly Ready'

    Thanks for that idea - I will try it with my nearly ready (again) box - I gained a 2.5 drive from a dead Goodmans freeview box. Does the drive need any other preparation, or will the Humax format it OK?
  8. Beavor-Bob

    Anybody want my broken T2

    Is it still available? I'm visiting St Albans in the near future. Cheers
  9. Beavor-Bob

    9300T - no stations received

    I've decided, the Tuner is U/S - keeping eyes open for a scrap 9300 box, hopefully with a good tuner! Thanks for your replies, no fighting on here please - there is enough silly nonsense in France & Syria, without more here:)
  10. Beavor-Bob

    9300T - no stations received

    There is NO water damage at the aerial input!
  11. Beavor-Bob

    9300T - no stations received

    Thanks for your replies - does anyone know what the voltages should be coming from the PSU? a link to service info would be handy. Thanks. But I am wondering if this is a failed tuner module, I have no idea as to it's history, apart from it was working 2 months ago, as there were programmes...
  12. Beavor-Bob

    9300T - no stations received

    Good aerial etc, everything else seems to work, but on searching, no signals found???? Power supply has been re-capacitated. Any ideas?
  13. Beavor-Bob

    DTR-T1000: recovering from 'Nearly Ready'

    Thanks for the info Monty. I recently purchased a heap of Humax boxes (& other stuff) at an auction, for £10 - one was a "Nearly ready" DTRT1000. Tried the reset options with another 3.5 HDD, nothing doing, it could not achieve it. So in desperation, just before it was heading for the bin...
Back
Top