Recent content by Dark Eyes

Won't that mean that it ignores all matching progs on channels below 100?

Is there a way to get Auto to select the HD version of a channel if it is available? It seems to always choose the SD version if the matching programme is on a channel with a HD version available.

Neither seem to allow me to set 2 simultaneous recordings, I get an error message saying "You have 1 Satellite Feed". This was the case when I initially set it up, as one cable had come loose in the plug, however, i have since corrected that and done a factory reset, and I can set simultaneous...

I have been using remote scheduling without any issues on my T2 box, so added rs to my FoxSat, and all seems to work, except that any recordings added via rs.hpkg.tv get stuck at pending, even after I have manually rebooted the box, and they are showing in the Foxsat's recording schedule. After...

I didn't boot up the T2 until 4ish, to pick up some remote scheduling and got the message that there were no channels. I then happened to look in Web-if and saw the tune-fix notification; hence my assumption that the two might be related. I'm still slightly curious at to why the T2 lost all its...

My T2 seems to have lost all its channels overnight, which I presume was caused by tune-fix - did anyone else experience this? A retune seems to have restored them, but I have never had this before with a tunefix update.

The filename was the issue, I didn't notice that it had the extra CFW. It installed as detailed from the 4GB stick (the 8GB one just got stuck at 0%) Thanks everyone for your input - very much appreciated.

What's annoying is that the FoxSAT is definitely reading both sticks, because if I put a jpg in the root folder of them, I can switch to USB1 and display the jpg; although it shown as being in a folder called sda1(1), which is think is the root folder in Linux. Obviously when I am trying to...

Hello all, I have read the instructions and some of the relevant forum posts about installing the CF, but I can't seem to find a USB stick that the FOXSAT detects. I have tried a SanDisk 8GB & a no-name 4GB and neither seem to get detected. Unfortunately I don’t t have anything smaller, so it...

I have noticed recently that a BT Youview box which gets its RF feed from the HDR's RF out, is intermittently reporting the signal dropping out on one of the HD muxes (Crystal Palace - com7), if the Humax is not on, or recording at the times. Power Saving in Standby is Off, as is Auto Power...

Accepted, I could go through noting the settings in Webif and reinstall the packages. The only reason I thought that this might work is that you said in the original thread "4. retrieve /mod"; which is preferable, if it is possible to do. Before wiping the drive, I used Filezilla to transfer...

It seems that to reinstall a package, I first need to uninstall it, which unfortunately gives me a Permission Denied error. Do I have to remote in and force-remove each package, to be able to reinstall them, or is there an easier way?

So I have been through the process of backing up the recordings and /mod directory, wiping the harddrive with dd if=/dev/zero of=/dev/sda bs=1M, as discussed in https://hummy.tv/forum/threads/does-lots-of-multiply-claimed-blocks-mean-that-my-drive-is-dying.10318/ The drive has been in use for...

So can I use the oflag & iflag parameters in the same command, and will an iflag error cause the process to stop, or do I need to add noerror to that part of the command?

Thanks for that information, that sounds like something to try before replacing the drive. That dd command line apparently fills the disk with zeros, which is sort of what I meant by a 'full format', as I think the drive reallocates any bad sectors during this process. Out of interest, how did...