Recent content by Dombert

  1. D

    Firmware Upload

    Checked handset mode change on good HB-1000S box and it was in mode 1. I was able to change into mode 2 and then back to mode 1 ok. Disconnected "good" box and connected "bad" box. Box booted to initial setup screen responding to handset power on button. Went into mode change but no change...
  2. D

    Firmware Upload

    The 8GB ones I used didn't work. After reading these instructions, I tried smaller ones I got as free promotion giveaways with company product information and this worked when I followed these instructions. the 8GB ones were recognised for recording storage but not as boot loaders. There are...
  3. D

    Firmware Upload

    I think the handset mode is ok unless you can correct my thinking, as I have the luxury of another "good" HB-1000S box to check functionality side by side. That's why I think it is a box issue rather than a handset issue as there is full unctionali8ty with the good box and limited on the problem...
  4. D

    Firmware Upload

    Checked the command receiver is working - pin 3 is showing acivity when handset is pressed. Also box responds to volume, mute and standby commands. Remade solder joints but that didn't solve the problem, but it was a long shot as the limited response recognition suggests that commands are...
  5. D

    Firmware Upload

    Thanks - the current download on the Humax site is 3.00.20 with v1.00 loader. When extracted it creates a file "hb1000s_upgrade.hdf". Humax site seems to show the same file version for all Freesat Freetime box versions. Found a very helpful procedure for Foxsat HDR which details the power boot...
  6. D

    Firmware Upload

    I have an HB-1000S box that appears to have corrupted firmware. The box boots to the initial setup screen and then hangs with no inputs accepted from the handset. The front panel standby switch works ok. I have downloaded the file for 3.00.20 from the Humax site and made up a USB stick. The...
Back
Top