Recent content by DrMopp

  1. D

    "No signal or the signal is too weak"

    No, can't touch the LNB at all as it's a communal dish serving 8 apartments in the block. Only just replaced a Foxsat HDR though and that never had any problems, although obviously the LNB fault could be a new one. Why do you suspect the LNB? Power cycling the box wouldn't "cure" it if it were...
  2. D

    "No signal or the signal is too weak"

    My 1100S has on a couple of occasions a week or so apart displayed this message - the TV screen goes blank, sound is lost and the message appears at the top of the screen in a white box for a few seconds, the TV then returns to normal for a few seconds, then the blank screen & message again...
  3. D

    1100S 'Inactive' Warning

    OK so maybe myposts are confusing becasue they relate to two separate incidents. To be clear, my first post related to an incidence of the box issuing a message on screen that it whad been inactive for 3hrs and would turn off if no activity, whilst playing a recording. The remote was used at...
  4. D

    1100S 'Inactive' Warning

    This is whilst watching a freesat channel with no recording going on. Why would it go into standby, and if it did wouldn't that stop the channel being viewed?
  5. D

    1100S 'Inactive' Warning

    Box still seems to work normally, but whilst doing so indicator light turns red-(sometimes) no pwer saving options set, any ideas?
  6. D

    1100S 'Inactive' Warning

    Thanks, did find that option, but why if the box powers down, (or goes into standby) as a result of that setting, does playback continue? I was also able to select the EPG and change to a freesat broadcast all whilst the indicator light was showing red?
  7. D

    1100S 'Inactive' Warning

    Whilst watching a recording the Humax put out a warning on screen that the box had been 'inacive for more than 3 hours' - it hadn't been inactive at all during that time - and I noticed the indicator light on the front was red, though I was able to continue viewing normally. Switching to a...
  8. D

    File Confusion!

    Downloaded and installed K-Lite Codec Pack and all OK now - thanks for your help.
  9. D

    File Confusion!

    Thanks for quick reply, it's not lack of audio though, that works, its lack of video, but I imagine the solution is the same, i.e. try VLC etc.
  10. D

    File Confusion!

    Having installed the custom firmware and got the Humax visible on my network, I have copied all the video content down onto a PC. Now totally confused as to what the various file types are and what I need to do to be able to play them! i.e. For each episode of a series there is a folder...
  11. D

    1100S Recording from Live TV

    Thanks for your help and comprehensive response.
  12. D

    Screen Saver?

    Yes definitely been through all the options on the menu and no 'picture off' setting. Not quite so pressing now as I have found that the screen is blank on most radio stations anyway, only the BBC ones display a banner with 'to activate screensaver press green' which results in the banner...
  13. D

    Screen Saver?

    Can't see it on mine - this model was a Curry's only 'special' or so they told me
  14. D

    Screen Saver?

    Sorry, model no. should have read UE40EH5000 - but no "picture off" setting on mine
Back
Top