Recent content by woodbar

  1. woodbar

    [dlna-filter] Filter out DLNA traffic to prevent crashes.

    Thanks guys - I have been hoping for something like this! Just updated CF and Webif etc. - installed the dlna-filter package - rebooted - turned on Twonky in the NSA310 AND no reboots on the HDR yet - magic stuff. NAS access still working (I save films from the HDR) just wait to confirm the...
  2. woodbar

    Humax Foxsat HDR - Picture breakup only on some channels

    Hi all, read most of this but it was getting a bit "edgy"! Just a quick suggestion - I had a very similar problem some time ago with picture drop out and pixellation on some channels - it turned out to be the fact that my broadband router was on a shelf in my office adjacent to where the...
  3. woodbar

    Regular interference on recordings - shrink scan?

    I am getting the same sort of problem - picture break-up and/or sound glitch for 1 or 2 seconds - occasionally a blank screen and no sound briefly? The only changes I have made recently are CF2.15 (of course) as well as Virtual-disk2, which I have now removed as I thought it might be the...
  4. woodbar

    Reboot 1-5 mins after startup every time

    Trouble is the DLNA server is "fixed" in the firmware for the NAS - it's not upgradeble as a standalone package - Zyxel are not that quick on updates and they seem to cure 2 bugs BUT generate 1 new one! Having said that it does work very well in most respects so I can't grumble too much (esp...
  5. woodbar

    Reboot 1-5 mins after startup every time

    I have had exactly the same occurrences. Turn OFF content sharing in the HDR-T2 menu - all works fine. Turn ON content sharing (after a reboot) - HDR-T2 immediately reboots? Then the I saw the light!:rolleyes: My Zyzel NSA310 NAS disk (where I transfer most of the films, after...
  6. woodbar

    Pixelation When Recording HD

    Suffering quite badly with pixellation and stuttering - strange mine seems to be on the recording (or of course the unencrypt record stage?) because I can reproduce the fault every time if I rewind/replay? I have temporarily removed RS and also altered the unencryptsetup to only run at time I...
  7. woodbar

    [network-shares-automount] package released

    Just a bit of feedback - have now tried 1.3 for a couple of days and it seems to be working well - for me this is the No.1 add-on! I have now removed the 1Tb USB drive I had attached to the HDR and I am solely using the NAS for extra storage - have placed a 4Gb USB stick on an extension cable...
  8. woodbar

    [network-shares-automount] package released

    Thanks very much for the update Drutt - I will try this later today on the HDR and report back. I think for safety and lack of confusion I will remove the existing package/shares/folders completely and start afresh with 1.3 (Yes I WILL make sure the NAS is off-line!)
  9. woodbar

    [network-shares-automount] package released

    Yes, so I noticed as you can see from my edit! I think you have some good ideas there - I like the thought of a suitable "special character" flag that denotes "leave me alone" etc. I notice the scanmounts log getting very large when there is an active USB device but the NAS is off I have...
  10. woodbar

    [network-shares-automount] package released

    Yes it seems reasonable when you think about it and, as I had not thought about it, I was surprised to see it there! That was just an observation - the thing that is niggling me is the error that says it has failed to mount - when it has? EDIT: I replied while you were editing your reply!
  11. woodbar

    [network-shares-automount] package released

    I've done some more testing having removed the first section of the script as suggested to get the shares back in "media" and it is working fine. One thing I did not realise is that if you don't have an active USB device plugged into the HDR you can still see the share in "media" from Webif -...
  12. woodbar

    [network-shares-automount] package released

    Yes, that's a thought - tried so many different add ons I can't remember what they all do! Does "virtual disc" appear as USB storage? In hindsight (a wonderful thing) I now tend to agree that "My Video" is probably not the best location for the shares. If you can get the USB "storage"...
  13. woodbar

    [network-shares-automount] package released

    .... sorry - part 2 - my tablet decide it didn't want to accept any more text in the above post! We are obviously starting to see "interaction" between the various packages - whilst each of these are "gems" and brilliant additions to the HDR in their own right - in certain combinations there...
  14. woodbar

    [network-shares-automount] package released

    I have installed & tested v1.2 - it appears to work very well and I have 2 mounts running - one to my "video" folder on my NSA310 and another for the esata Seagate connected to th NAS. However I have noticed a couple of problems - the HDR did "freeze" at one point - I was seeking through an...
  15. woodbar

    [network-shares-automount] package released

    Yes, actualy for the HDR it would be better to "invert" the location of the relevant folders: *Modsettings in Media "mount_share" in My Video
Back
Top