Derek, Syncing to 50Hz is not required , Maybe I need to make myself clearer. If your are using a rasberry pi or an android device they are perfectly capable of outputing 60Hz signals, so they can play on any vga monitor. If, however you are trying to connect a humax device, which outputs only...
Like you Ezra I too was very skeptical but I needed a solution ( a little android tv box feeding a pc monitor ) and so bought one off ebay and guess what it works. Biggest problem is finding a vga monitor that will sync to 50hz . Most computer monitors still won't go below 60hz. Anyway it worked...
Problem for me is that time delayed viewings are not planned they are usually as a result of a phone call or some other interuption, which results in me putting the thing into pause ( I know, i know why don't you hit record instead, old dog new tricks etc ) . Then just as I'm getting to the end...
Thanks Luke, I must have done this by default in the past . I've a couple of recordings that have the name of the preceding programme , now I know why !!!:D
Socrates, just read your post and yes, this happens to me. The thing is, never use delayed tv before a scheduled record. Easier said than done !!! the option above is a workaround , but It's just struck me when the box comes up asking yes or no. if you answer no the box will cancel the...
http://www.tp-link.com.au/products/details/?model=TL-WR702N
works a treat on my smart tv and the Hummy. As it's an ethernet router it is ideal if you can't get an Edimax usb wirelss dongle. Very easy to set up too !!
I bought it mainly to use in hotels when I'm travelling, going to have to buy...
Wild media server on a pc allows you to stream to the HDR but it was a bit of a phaff so I gave up on it. Might have a go again now there's been another couple of version releases. Don't know of anything for an iPhone but it is possible . My favourite at the moment is a rasberry pi running XBMC...
I'm sure I bought it in 2004 but that's old age for you , now where did I leave my bus pass !!!!:frantic:
Still prefer the remote even if it's only 7 years old, Think the transport controls are better
I miss the back button as it worked on the 9200, bit of a fiddle on the T2, but that's a minor con . The T2 is a much more refined machine, you won't regret the upgrade.
I store a lot of mp3's on mine , ok the 9200 offered that as well but normally crashed the machine.
Networking is a major...
You read many times on here and in fact I say it as well HDMI leads are all the same but........ a poorly made HDMI lead will cause little green flecks on 1080 in particular. Try another lead. I have a HDMI switch causes green flashing on 1080 clean on 720. Also could be a clocking error on your...
Excellent rant there from LDW deserves a 7.465/10 , brightened up a sunday morning :cool:
ps I agree with him. It's the re-tune for channels I never use that annoys me and should not be on freeview in the first place.
that was sort of my intention, seems to be a tv issue so split the signal try to keep the humax out of the loop. Be far easier if they just kept the hummy on and used it as their main tuner. Can't understand why people don't do this , pause and rewind live tv is used all the time in our house
the f type are far superior and is what i would use but it means putting f connectors on , which is a whole new ball game
these are probably better and cheaper
http://www.screwfix.com/p/labgear-19132r-s-2-way-metal-t-splitter/44534 or ftype...
Only one suggestion don't use the humax pass through use a splitter on the coax input and see if it improves matters. Seem to be getting tv/humax not compatible try to borrow beg ,steal and in the last resort buy one of these
http://www.maplin.co.uk/2-into-1-coax-y-adaptor-1625
Sorry failed to mention ch 57 it has a MEN news and a couple of other channels of no quality at all and Ch54 is hd only. From what I can gather it's when you're using the TV tuner is when you have the problem. Are you 100% sure the humax is not in power saving mode ie the pass through powered down
I don't know your set up but I did have a TV whose inputs crossed talked very badly ie humax playing back you could see the tv underneath. I'm afraid it was a faulty tv ( now in use in the bedroom as a tv only). try isolating the hdmi inputs and the aerial inputs see if you identify a particular...
Derek, Syncing to 50Hz is not required , Maybe I need to make myself clearer. If your are using a rasberry pi or an android device they are perfectly capable of outputing 60Hz signals, so they can play on any vga monitor. If, however you are trying to connect a humax device, which outputs only...
Like you Ezra I too was very skeptical but I needed a solution ( a little android tv box feeding a pc monitor ) and so bought one off ebay and guess what it works. Biggest problem is finding a vga monitor that will sync to 50hz . Most computer monitors still won't go below 60hz. Anyway it worked...
Problem for me is that time delayed viewings are not planned they are usually as a result of a phone call or some other interuption, which results in me putting the thing into pause ( I know, i know why don't you hit record instead, old dog new tricks etc ) . Then just as I'm getting to the end...
Thanks Luke, I must have done this by default in the past . I've a couple of recordings that have the name of the preceding programme , now I know why !!!:D
Socrates, just read your post and yes, this happens to me. The thing is, never use delayed tv before a scheduled record. Easier said than done !!! the option above is a workaround , but It's just struck me when the box comes up asking yes or no. if you answer no the box will cancel the...
http://www.tp-link.com.au/products/details/?model=TL-WR702N
works a treat on my smart tv and the Hummy. As it's an ethernet router it is ideal if you can't get an Edimax usb wirelss dongle. Very easy to set up too !!
I bought it mainly to use in hotels when I'm travelling, going to have to buy...
Wild media server on a pc allows you to stream to the HDR but it was a bit of a phaff so I gave up on it. Might have a go again now there's been another couple of version releases. Don't know of anything for an iPhone but it is possible . My favourite at the moment is a rasberry pi running XBMC...
I'm sure I bought it in 2004 but that's old age for you , now where did I leave my bus pass !!!!:frantic:
Still prefer the remote even if it's only 7 years old, Think the transport controls are better
I miss the back button as it worked on the 9200, bit of a fiddle on the T2, but that's a minor con . The T2 is a much more refined machine, you won't regret the upgrade.
I store a lot of mp3's on mine , ok the 9200 offered that as well but normally crashed the machine.
Networking is a major...
You read many times on here and in fact I say it as well HDMI leads are all the same but........ a poorly made HDMI lead will cause little green flecks on 1080 in particular. Try another lead. I have a HDMI switch causes green flashing on 1080 clean on 720. Also could be a clocking error on your...
Excellent rant there from LDW deserves a 7.465/10 , brightened up a sunday morning :cool:
ps I agree with him. It's the re-tune for channels I never use that annoys me and should not be on freeview in the first place.
that was sort of my intention, seems to be a tv issue so split the signal try to keep the humax out of the loop. Be far easier if they just kept the hummy on and used it as their main tuner. Can't understand why people don't do this , pause and rewind live tv is used all the time in our house
the f type are far superior and is what i would use but it means putting f connectors on , which is a whole new ball game
these are probably better and cheaper
http://www.screwfix.com/p/labgear-19132r-s-2-way-metal-t-splitter/44534 or ftype...
Only one suggestion don't use the humax pass through use a splitter on the coax input and see if it improves matters. Seem to be getting tv/humax not compatible try to borrow beg ,steal and in the last resort buy one of these
http://www.maplin.co.uk/2-into-1-coax-y-adaptor-1625
Sorry failed to mention ch 57 it has a MEN news and a couple of other channels of no quality at all and Ch54 is hd only. From what I can gather it's when you're using the TV tuner is when you have the problem. Are you 100% sure the humax is not in power saving mode ie the pass through powered down
I don't know your set up but I did have a TV whose inputs crossed talked very badly ie humax playing back you could see the tv underneath. I'm afraid it was a faulty tv ( now in use in the bedroom as a tv only). try isolating the hdmi inputs and the aerial inputs see if you identify a particular...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.