• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

Search results

Forum Search Results Google Search Results

    1. moosey

      Recording end missed

      Okay, I performed a total system reset and after nearly a couple of weeks of behaving correctly the box last night made a 95 minute recording last for 439 minutes and prevented another scheduled recording from happening. Not sure if its relevant, but yesterday afternoon I performed a channel...
    2. moosey

      Power Supply issue?

      Its not the tuners or the supply to the tuners as I am getting good signal levels reported and 100% quality at all times. The problem would seem to be in the circuitry that does the decoding or the processing of the decoded signals. In the picture that Black Hole kindly posted above, the heat...
    3. moosey

      Power Supply issue?

      Update. An exchange of PSU boards between my two units shows that the problem is NOT with the PSU. Use of a hairdrier and freezer spray on the faulty unit seems to indicate that the problem is on the main board with either the large component with the winged heatsink (microprocessor?) or IC...
    4. moosey

      Power Supply issue?

      No, the RF connectors on both my boxes are aligned horizontally.
    5. moosey

      Power Supply issue?

      Unfortunately, when mine gets in this state even a full power cycle doesn't fix it.
    6. moosey

      Power Supply issue?

      Hi MymsMan, Yes, I have got Sysmon and Fan packages already installed and over the past 30 days temperatures have never exceeded 40 degrees (Fan package set at 50%). Do you see these messages just at startup or at other times? I am seeing them on all channels, SD and HD. After my box had a bit...
    7. moosey

      Power Supply issue?

      Hi Martin, That would be an idea, but at the moment the box has started to behave itself! After an hour+ of letting things cool off it is still starting as it should. Whilst the covers were off I did remove the HDD/Fan unit and disconnect/reconnect the cable between PSU and main board just to...
    8. moosey

      Power Supply issue?

      Hi All, Previous recordings are all decrypted. Just tried the box with HDD disconnected and no difference. Whilst the lid is off I took a look at the PSU capacitors and no bulging seen. Whilst a signal was being received I used some freezer spray to try to find any weak component(s) and all...
    9. moosey

      Power Supply issue?

      Signal detection shows signal strengths are all in the 60% area apart from the two Local muxes which are 40% and 25%. Quality on all is 100%. Again, my other box from the same aerial and similar levels is working fine. I did have a couple of re-boots on this box this morning as well. Whilst in...
    10. moosey

      Power Supply issue?

      Hi Trev, Signals from one transmitter only (Hannington) - see attached: The one channel I have in the 800s is due to Hannington having local services for both Reading and North Hants. My other Fox T2 has similar signal levels (fed from the same aerial) and is working fine.
    11. moosey

      Power Supply issue?

      Hi Trev, Thanks for the thought. Signal strength is fine. I am getting a good signal strength and 100% quality. In any case, no/low signal gives a different grey screen warning - "The receiver is not receiving a signal or the signal is too weak". Peter
    12. moosey

      Power Supply issue?

      Hi All, One of my HDR-Fox-T2's has recently had an issue on powering up from standby. Initially (a couple of days ago), for a couple of seconds, I got a message on a grey background saying "This channel is scrambled or unavailable" quickly followed by "No programmes are currently being...
    13. moosey

      Recording end missed

      No, I'm only receiving signals from one transmitter (Hannington). I can try the crop option,but it's most likely that these programmes will be deleted once viewed. Thanks, Peter
    14. moosey

      Recording end missed

      Thanks again BH, I'm just waiting for the box to finish decrypting the Guy Martin programme. Even though it's shown as 120 mins duration the file size is over 20GB! Auto-decrypt taking its time accordingly. There was another prog recorded last night, 1 hour duration SD, and that is showing as an...
    15. moosey

      Recording end missed

      Thanks BH, I was hoping it wouldn't be necessary but I'll give it a go! Cheers, Peter
    16. moosey

      Recording end missed

      Hi, These were manually entered via the box itself or via the WebIF. I don't use RTS. The first two were series linked and the last one a one-off.
    17. moosey

      Recording end missed

      Hi, I've had this problem three times in the last week where the HDR-T2 continued to record after the scheduled end time. Three different programmes on three different channels. The first I was aware of this problem was when recording the MotoGP last Monday and the box was still recording long...
    18. moosey

      HDR Fox T2 Wireless Dongle

      Hi Ezra, I am using CF 3.13 /1.03.12, and was under the impression that this problem had been fixed. Cheers, Peter
    19. moosey

      HDR Fox T2 Wireless Dongle

      Hello All, I've just purchased one of the LED Light Mini 150M USB RT3070 dongles off eBay as suggested in the Wiki (FAQ - which wifi dongle) and is doesn't seem to work with the Hummy on wifi channels 1 to 4. It works fine on a laptop, but when tried on two HDR-Fox T2s running CFW 3.13 it does...
    20. moosey

      Random reset

      Yes, the channel list seems full and I can create a favourite list manually. Its only when I do a 'restore' that I end up with only the first 6 channels in the favourite list. Then, I have to go back in and manually add the other channels it missed. Very strange! Peter
    1. moosey

      Recording end missed

      Okay, I performed a total system reset and after nearly a couple of weeks of behaving correctly the box last night made a 95 minute recording last for 439 minutes and prevented another scheduled recording from happening. Not sure if its relevant, but yesterday afternoon I performed a channel...
    2. moosey

      Power Supply issue?

      Its not the tuners or the supply to the tuners as I am getting good signal levels reported and 100% quality at all times. The problem would seem to be in the circuitry that does the decoding or the processing of the decoded signals. In the picture that Black Hole kindly posted above, the heat...
    3. moosey

      Power Supply issue?

      Update. An exchange of PSU boards between my two units shows that the problem is NOT with the PSU. Use of a hairdrier and freezer spray on the faulty unit seems to indicate that the problem is on the main board with either the large component with the winged heatsink (microprocessor?) or IC...
    4. moosey

      Power Supply issue?

      No, the RF connectors on both my boxes are aligned horizontally.
    5. moosey

      Power Supply issue?

      Unfortunately, when mine gets in this state even a full power cycle doesn't fix it.
    6. moosey

      Power Supply issue?

      Hi MymsMan, Yes, I have got Sysmon and Fan packages already installed and over the past 30 days temperatures have never exceeded 40 degrees (Fan package set at 50%). Do you see these messages just at startup or at other times? I am seeing them on all channels, SD and HD. After my box had a bit...
    7. moosey

      Power Supply issue?

      Hi Martin, That would be an idea, but at the moment the box has started to behave itself! After an hour+ of letting things cool off it is still starting as it should. Whilst the covers were off I did remove the HDD/Fan unit and disconnect/reconnect the cable between PSU and main board just to...
    8. moosey

      Power Supply issue?

      Hi All, Previous recordings are all decrypted. Just tried the box with HDD disconnected and no difference. Whilst the lid is off I took a look at the PSU capacitors and no bulging seen. Whilst a signal was being received I used some freezer spray to try to find any weak component(s) and all...
    9. moosey

      Power Supply issue?

      Signal detection shows signal strengths are all in the 60% area apart from the two Local muxes which are 40% and 25%. Quality on all is 100%. Again, my other box from the same aerial and similar levels is working fine. I did have a couple of re-boots on this box this morning as well. Whilst in...
    10. moosey

      Power Supply issue?

      Hi Trev, Signals from one transmitter only (Hannington) - see attached: The one channel I have in the 800s is due to Hannington having local services for both Reading and North Hants. My other Fox T2 has similar signal levels (fed from the same aerial) and is working fine.
    11. moosey

      Power Supply issue?

      Hi Trev, Thanks for the thought. Signal strength is fine. I am getting a good signal strength and 100% quality. In any case, no/low signal gives a different grey screen warning - "The receiver is not receiving a signal or the signal is too weak". Peter
    12. moosey

      Power Supply issue?

      Hi All, One of my HDR-Fox-T2's has recently had an issue on powering up from standby. Initially (a couple of days ago), for a couple of seconds, I got a message on a grey background saying "This channel is scrambled or unavailable" quickly followed by "No programmes are currently being...
    13. moosey

      Recording end missed

      No, I'm only receiving signals from one transmitter (Hannington). I can try the crop option,but it's most likely that these programmes will be deleted once viewed. Thanks, Peter
    14. moosey

      Recording end missed

      Thanks again BH, I'm just waiting for the box to finish decrypting the Guy Martin programme. Even though it's shown as 120 mins duration the file size is over 20GB! Auto-decrypt taking its time accordingly. There was another prog recorded last night, 1 hour duration SD, and that is showing as an...
    15. moosey

      Recording end missed

      Thanks BH, I was hoping it wouldn't be necessary but I'll give it a go! Cheers, Peter
    16. moosey

      Recording end missed

      Hi, These were manually entered via the box itself or via the WebIF. I don't use RTS. The first two were series linked and the last one a one-off.
    17. moosey

      Recording end missed

      Hi, I've had this problem three times in the last week where the HDR-T2 continued to record after the scheduled end time. Three different programmes on three different channels. The first I was aware of this problem was when recording the MotoGP last Monday and the box was still recording long...
    18. moosey

      HDR Fox T2 Wireless Dongle

      Hi Ezra, I am using CF 3.13 /1.03.12, and was under the impression that this problem had been fixed. Cheers, Peter
    19. moosey

      HDR Fox T2 Wireless Dongle

      Hello All, I've just purchased one of the LED Light Mini 150M USB RT3070 dongles off eBay as suggested in the Wiki (FAQ - which wifi dongle) and is doesn't seem to work with the Hummy on wifi channels 1 to 4. It works fine on a laptop, but when tried on two HDR-Fox T2s running CFW 3.13 it does...
    20. moosey

      Random reset

      Yes, the channel list seems full and I can create a favourite list manually. Its only when I do a 'restore' that I end up with only the first 6 channels in the favourite list. Then, I have to go back in and manually add the other channels it missed. Very strange! Peter
Back
Top