Hi, appreciate any advice on this one. I have a PVR-9300T which works perfectly apart from one oddity. I set up the machine, tuned in and set the picture settings to 16:9 and 720P to get the best picture on my widescreen led tv. If I leave the unit switched on all is fine; if I put it in...
Hi, can anyone tell me if the Foxsat HDR can tune in to the Hotbird satellite? Obviously the dish needs to move, I think Hotbird is at 13 degrees east rather than the 28.2 degrees for Astra/ Freesat.
I wouldn't bother testing the disk unless you have a problem. From what I've heard the Humax test routine is very basic. Best way to test is to remove the disk, install it in a PC and use manufacturer's test software such as Seagate Seatools or Western Digital Data Lifeguard. To be safe back...
Hi Frogman23, just wondering how you got on with the Foxsat HDR or is it still u/s. I'm interested in case you decide to get rid because I have one which is not working - stuck on initial boot. I do know it works if I change the front panel so I'm on the lookout for spares.
I sometimes lose access to the hard disk on my HDR2000T, especially after it's been unplugged. Try this if you haven't already.
1 Unplug the recorder at the mains (note, the dc plug/socket contact can become unreliable if the plug is repeatedly taken out/pushed in).
2. Switch on your tv so...
Hi, does anyone have the manufacturer and part number for the DC barrel connector socket on the HDR 2000T (and probably lots of other Humax products with separate DC power supply)?
I have one which makes intermittent contact, a bit annoying when the cable moves and the recorder cuts out. I...
Very few and far between; people want high prices for units "Not working". Mind you, two of the not working units I picked up for £22.00 were a very easy fix and I did manage to get a working one for £3.20!
Is anyone well clued up on the Foxsat HDR front panel pcb? I have a unit which refuses to boot up properly, leaving an on screen message "loading update" or "loading channel data" - something similar to these messages. The loader software is 7.54 but I can't see which software version it's...
Just thought I'd come back to say I recovered my HDR2000T. In the end I removed the pcb and cut away the plastic on the old power socket leaving just the metal tabs. I could now see which tab corresponded to positive DC in, Negative DC in and switched. I cut the metal tabs to leave enough...
May be able to join the lugs from the panel socket directly to the old lugs if I'm careful cutting them. I prefer to do as little as possible on modern pcbs, they're just a bit too delicate.
You must have read my mind; I had a mental picture of the socket with its solder already done, sitting in an oven to solder the surface mount components. I think the solution may be to cut off the plastic from the original socket, shorten the lugs and solder leads on going to a panel mount...
Just soldered a job on some Black and Decker garden shears and it was thermally bigger than the Humax job. I'm wondering if there's a coating on the joints stopping them wetting and heating up.
Multicore solder with flux, the iron is 15 watts I think and has tackled bigger jobs than this. If it comes to the crunch, I'll carefully cut the old socket off, leave the shortened lugs in the board and use a chassis mount socket with short flying leads soldered to them.
Thanks for the reply, will try to post a photo tomorrow. It's a fairly standard pcb mount socket with three lugs soldered through the board to the underside. It's mounted on the back RH corner of the main pcb, viewed fom above. The solder doesn't seem to melt for my iron, even with a blob of...
Hi, I'm trying to replace the DC power socket on my HDR2000T - it will make very intermittent contact when tried with the board out of the case, testing with a continuity meter, but not at all in use.
I've tried to desolder the lugs on the socket but the solder doesn't seem to want to melt...
Hi, appreciate any advice on this one. I have a PVR-9300T which works perfectly apart from one oddity. I set up the machine, tuned in and set the picture settings to 16:9 and 720P to get the best picture on my widescreen led tv. If I leave the unit switched on all is fine; if I put it in...
Hi, can anyone tell me if the Foxsat HDR can tune in to the Hotbird satellite? Obviously the dish needs to move, I think Hotbird is at 13 degrees east rather than the 28.2 degrees for Astra/ Freesat.
I wouldn't bother testing the disk unless you have a problem. From what I've heard the Humax test routine is very basic. Best way to test is to remove the disk, install it in a PC and use manufacturer's test software such as Seagate Seatools or Western Digital Data Lifeguard. To be safe back...
Hi Frogman23, just wondering how you got on with the Foxsat HDR or is it still u/s. I'm interested in case you decide to get rid because I have one which is not working - stuck on initial boot. I do know it works if I change the front panel so I'm on the lookout for spares.
I sometimes lose access to the hard disk on my HDR2000T, especially after it's been unplugged. Try this if you haven't already.
1 Unplug the recorder at the mains (note, the dc plug/socket contact can become unreliable if the plug is repeatedly taken out/pushed in).
2. Switch on your tv so...
Hi, does anyone have the manufacturer and part number for the DC barrel connector socket on the HDR 2000T (and probably lots of other Humax products with separate DC power supply)?
I have one which makes intermittent contact, a bit annoying when the cable moves and the recorder cuts out. I...
Very few and far between; people want high prices for units "Not working". Mind you, two of the not working units I picked up for £22.00 were a very easy fix and I did manage to get a working one for £3.20!
Is anyone well clued up on the Foxsat HDR front panel pcb? I have a unit which refuses to boot up properly, leaving an on screen message "loading update" or "loading channel data" - something similar to these messages. The loader software is 7.54 but I can't see which software version it's...
Just thought I'd come back to say I recovered my HDR2000T. In the end I removed the pcb and cut away the plastic on the old power socket leaving just the metal tabs. I could now see which tab corresponded to positive DC in, Negative DC in and switched. I cut the metal tabs to leave enough...
May be able to join the lugs from the panel socket directly to the old lugs if I'm careful cutting them. I prefer to do as little as possible on modern pcbs, they're just a bit too delicate.
You must have read my mind; I had a mental picture of the socket with its solder already done, sitting in an oven to solder the surface mount components. I think the solution may be to cut off the plastic from the original socket, shorten the lugs and solder leads on going to a panel mount...
Just soldered a job on some Black and Decker garden shears and it was thermally bigger than the Humax job. I'm wondering if there's a coating on the joints stopping them wetting and heating up.
Multicore solder with flux, the iron is 15 watts I think and has tackled bigger jobs than this. If it comes to the crunch, I'll carefully cut the old socket off, leave the shortened lugs in the board and use a chassis mount socket with short flying leads soldered to them.
Thanks for the reply, will try to post a photo tomorrow. It's a fairly standard pcb mount socket with three lugs soldered through the board to the underside. It's mounted on the back RH corner of the main pcb, viewed fom above. The solder doesn't seem to melt for my iron, even with a blob of...
Hi, I'm trying to replace the DC power socket on my HDR2000T - it will make very intermittent contact when tried with the board out of the case, testing with a continuity meter, but not at all in use.
I've tried to desolder the lugs on the socket but the solder doesn't seem to want to melt...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.