As I said before it did disappear briefly from the HDR but it appeared back in there very quickly. I'm still thinking of getting an alternative because the Humax one can't access your youtube account, and the search facility is dreadful
Yes, I had a message last month when I tried to access uTube saying the app was being withdrawn due to uTube moving to only accepting https, then the app disappeared from the list.
The following week when I went to use iPlayer I noticed that it was back and I tried it and it worked. I wonder...
Well I've finally managed to get enough free time to fix the problem.
I have now rebooted the WCN4004, and everything is now working, although nothing looks any different in the Nighthawk router Attached Devices Page. That's the first time the WCN4004 has caused any problems.
Sorry that I...
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
The router web page is indeed the same as the gateway
tracert www.routerlogin.com
Tracing route to www.routerlogin.com [192.168.1.1]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms...
If you read what I said, I didn't turn off the DHCP server, what I did is swap the device mode to "Modem Only", there are no longer any controls over the DHCP as shown in the PDF I linked.
As soon as I get home I fetch the settings from the Nighthawk router
As I said earlier the first router is no longer acting router, there is a device page that makes it only an ADSL modem, so there is no longer a DHCP server on the original router to conflict with anything.
All my other devices like laptops, smart phones and the TV are accessing the internet...
Ah right, that makes sense, the box seemed to freeze up and not respond to the remote so I used Telnet to cause it to reboot, and after that I was able to view the web interface. The same sort of thing happened with the new hard disk, the Humax needed to be booted up with a working hard drive...
Last night I tried turning off both the routers, but that didn't seem to help, so I got bored and went to bed. I will try turning off the WCN4004, and see if rebooting that helps.
Trev, the WCN4004 isn't a router its the Wifi-To-Wired Media extender.
The older router was the Netgear DG834. I think it must be this that is giving the address of 192.168.1.1 for the gateway. It is the only device with the ADSL modem, so I imagine that the DG834 is the gateway, so it...
Look, I read the instructions last week, this was the link I followed:
https://hummy.tv/forum/threads/quick-start-guide.1301/
Which contains the text
1 .Perform a manual firmware update to install the custom firmware download onto the HD/HDR-FOX. The procedures are slightly different for...
I didn't overestimate the number of Linux commands available in the Humax stripped-down OS because the thread implied that those commands would work. I have no idea what Linux commands are available, becuase I don't actually use Linux.
So on this very thread it mentioned the commands I...
Why should I know that, there's never been a need, I've always used the one on the remote, the instructions didn't mention using the remote so I then assumed there must be a physical standby button, so I guessed it would be the centre of the ring
Not sure why but I noticed that the humax changed IP again back to .10, some of the bull settings I put in the Humax network menu, seemed to stick when I went back to asking for DHCP, so I manually entered all the settings using the correct gateway and the .8 address, but when I then went back...
Well I've no idea what is different between now and last time with the old hard disk. The WebIF interface will not install from USB, it does indeed create a log. but nothing works I still get the 'Custom Firmware Successfully Installed!' webpage with the yellow 'Download & Install the Full Web...
I've tried setting it to manual, both with an IP in the DHCP range of the router and outside, and the Humax connected each time, but it makes no difference to the problem.
The Humax system information tells me that it does have a MAC Address, but it is not listed in the routers pages, the internet settings give the same gateway address as IPCONFIG does on windows
192.168.1.1, and the Net Mask is 255.255.255.0, and under DNS it lists the same number as the gateway...
I don't seem to be able to run all the commands shown above.
humax# tcpping hpkg.tv 80
ERROR Connection refused
humax# traceroute hpkg.tv
/bin/sh: traceroute: not found
humax# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface...
I'm very confused by my router pages at the moment, the trouble is I didn't look at them when it was working so I don't know what is different.
I have the following
192.168.1.128 Denon AVR-1912
192.168.1.240 No Idea, maybe the WCN4004 box it's self
191.168.1.10 The Humax (currently telnetable)...
Hi Black Hole,
I got exactly what I expected when I installed the custom firmware, it was exactly as documented, although I had no idea what the standby button was, but assumed it must be the centre of the ring, which turned out to be correct.
No what I mean was it was the installation of the...
I think you mean me!
Well I'm having more problems than I did before I set out to run the custom firmware. Its been a little while since I used the Humax TV Portal, but there has been quite a few things that have changed to muddy the waters since then.
I have installed the custom firmware...
As I said before it did disappear briefly from the HDR but it appeared back in there very quickly. I'm still thinking of getting an alternative because the Humax one can't access your youtube account, and the search facility is dreadful
Yes, I had a message last month when I tried to access uTube saying the app was being withdrawn due to uTube moving to only accepting https, then the app disappeared from the list.
The following week when I went to use iPlayer I noticed that it was back and I tried it and it worked. I wonder...
Well I've finally managed to get enough free time to fix the problem.
I have now rebooted the WCN4004, and everything is now working, although nothing looks any different in the Nighthawk router Attached Devices Page. That's the first time the WCN4004 has caused any problems.
Sorry that I...
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
The router web page is indeed the same as the gateway
tracert www.routerlogin.com
Tracing route to www.routerlogin.com [192.168.1.1]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms...
If you read what I said, I didn't turn off the DHCP server, what I did is swap the device mode to "Modem Only", there are no longer any controls over the DHCP as shown in the PDF I linked.
As soon as I get home I fetch the settings from the Nighthawk router
As I said earlier the first router is no longer acting router, there is a device page that makes it only an ADSL modem, so there is no longer a DHCP server on the original router to conflict with anything.
All my other devices like laptops, smart phones and the TV are accessing the internet...
Ah right, that makes sense, the box seemed to freeze up and not respond to the remote so I used Telnet to cause it to reboot, and after that I was able to view the web interface. The same sort of thing happened with the new hard disk, the Humax needed to be booted up with a working hard drive...
Last night I tried turning off both the routers, but that didn't seem to help, so I got bored and went to bed. I will try turning off the WCN4004, and see if rebooting that helps.
Trev, the WCN4004 isn't a router its the Wifi-To-Wired Media extender.
The older router was the Netgear DG834. I think it must be this that is giving the address of 192.168.1.1 for the gateway. It is the only device with the ADSL modem, so I imagine that the DG834 is the gateway, so it...
Look, I read the instructions last week, this was the link I followed:
https://hummy.tv/forum/threads/quick-start-guide.1301/
Which contains the text
1 .Perform a manual firmware update to install the custom firmware download onto the HD/HDR-FOX. The procedures are slightly different for...
I didn't overestimate the number of Linux commands available in the Humax stripped-down OS because the thread implied that those commands would work. I have no idea what Linux commands are available, becuase I don't actually use Linux.
So on this very thread it mentioned the commands I...
Why should I know that, there's never been a need, I've always used the one on the remote, the instructions didn't mention using the remote so I then assumed there must be a physical standby button, so I guessed it would be the centre of the ring
Not sure why but I noticed that the humax changed IP again back to .10, some of the bull settings I put in the Humax network menu, seemed to stick when I went back to asking for DHCP, so I manually entered all the settings using the correct gateway and the .8 address, but when I then went back...
Well I've no idea what is different between now and last time with the old hard disk. The WebIF interface will not install from USB, it does indeed create a log. but nothing works I still get the 'Custom Firmware Successfully Installed!' webpage with the yellow 'Download & Install the Full Web...
I've tried setting it to manual, both with an IP in the DHCP range of the router and outside, and the Humax connected each time, but it makes no difference to the problem.
The Humax system information tells me that it does have a MAC Address, but it is not listed in the routers pages, the internet settings give the same gateway address as IPCONFIG does on windows
192.168.1.1, and the Net Mask is 255.255.255.0, and under DNS it lists the same number as the gateway...
I don't seem to be able to run all the commands shown above.
humax# tcpping hpkg.tv 80
ERROR Connection refused
humax# traceroute hpkg.tv
/bin/sh: traceroute: not found
humax# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface...
I'm very confused by my router pages at the moment, the trouble is I didn't look at them when it was working so I don't know what is different.
I have the following
192.168.1.128 Denon AVR-1912
192.168.1.240 No Idea, maybe the WCN4004 box it's self
191.168.1.10 The Humax (currently telnetable)...
Hi Black Hole,
I got exactly what I expected when I installed the custom firmware, it was exactly as documented, although I had no idea what the standby button was, but assumed it must be the centre of the ring, which turned out to be correct.
No what I mean was it was the installation of the...
I think you mean me!
Well I'm having more problems than I did before I set out to run the custom firmware. Its been a little while since I used the Humax TV Portal, but there has been quite a few things that have changed to muddy the waters since then.
I have installed the custom firmware...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.