Channels 55 and 56

It take it you are not familiar with the linux or unix commands

On the Diag page there should be an option for Command line (you may need to install the Webshell package)
Choose this, enter your PIN (try 0000) and then choose cli from the list.

This will give you a command line where you can issue the mv command (move file to new name)
Code:
mv /mod/boot/tunefix.conf   /mod/boot/tunefixold.conf
Right click is paste in the command window
 
I notice that channels 32 and 34 showed up when tunefix was not installed but are missing with tunefix installed. I am guessing that these two come from the Kent region (which shows up as an alternative to London when tunefix is not installed)
Presumably from Bluebell Hill, but it's difficult to say without knowing roughly where you are.
Do you not get a full set from CP?
I can't think why you would want these 32 and 34 channels.
Is the current tunefix.conf correct?
What exactly do you mean by "the current"? The default is correct as installed from a blank configuration. You didn't start from a blank configuration.
But (unless an old tunefix.conf file persisted through my uninstalls and installs of tunefix) it is currently wrong
It does, and it isn't, respectively.
But I would still like to know how to get the default configuration back.
Go to a command prompt (telnet, ssh or Webshell) and issue the following command:
Code:
humax# /mod/boot/xinit.d/tunefix install
 
I didn't say I WANTED 32 and 34, I was just curious about them.

Thanks for explaining that my older config file had persisted.

I have just installed webshell. So it was easy to do the command suggested by MymsMan.
 
Last edited:
Back
Top