I ran a Fix Disk just to see if there was anything wrong with the HDD, my Humax is going on 4-5 years now with the original HDD
I attached the log, it shows quite a few illegal blocks and unattached inodes. Is it anything to be concerned about? Because of the fixes made should I expect any skips in my stored recordings?
On the plus side, I find the pause and fast forward buttons on the remote to be more responsive now after running Fix Disk.
Edit: Adding SMART info if needed for reference:
I attached the log, it shows quite a few illegal blocks and unattached inodes. Is it anything to be concerned about? Because of the fixes made should I expect any skips in my stored recordings?
On the plus side, I find the pause and fast forward buttons on the remote to be more responsive now after running Fix Disk.
Edit: Adding SMART info if needed for reference:
Disk Information
SMART Status PASSED
Model Family Seagate Pipeline HD 5900.2
Device Model ST3500312CS
Serial Number 6VVF743Q
LU WWN Device Id 5 000c50 04a21645f
Firmware Version SC13
User Capacity 500,107,862,016 bytes [500 GB]
Sector Size 512 bytes logical/physical
Rotation Rate 5900 rpm
Device is In smartctl database [for details use: -P show]
ATA Version is ATA8-ACS T13/1699-D revision 4
SATA Version is SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is Wed Mar 1 23:50:55 2017 GMT
SMART support is Available - device has SMART capability.
SMART support is Enabled
Attributes
ID Name Flags Raw Value Value Worst Threshold Life Left Notes
1 Raw_Read_Error_Rate POSR-- 148492950 117 099 006 -
3 Spin_Up_Time PO---- 0 097 097 000 -
4 Start_Stop_Count -O--CK 3126 097 097 020 97% -
5 Reallocated_Sector_Ct PO--CK 0 100 100 036 100% -
7 Seek_Error_Rate POSR-- 55467624 077 060 030 -
9 Power_On_Hours -O--CK 2440 098 098 000 98% -
10 Spin_Retry_Count PO--C- 0 100 100 097 100% -
12 Power_Cycle_Count -O--CK 1563 099 099 020 99% -
184 End-to-End_Error -O--CK 0 100 100 099 -
187 Reported_Uncorrect -O--CK 0 100 100 000 -
188 Command_Timeout -O--CK 0 100 100 000 -
189 High_Fly_Writes -O-RCK 0 100 100 000 -
190 Airflow_Temperature_Cel -O---K 27 073 (27°C) 043 (57°C) 045 (55°C) In_the_past
194 Temperature_Celsius -O---K 27 027 057 000 -
195 Hardware_ECC_Recovered -O-RC- 148492950 048 036 000 -
197 Current_Pending_Sector -O--C- 0 100 100 000 -
198 Offline_Uncorrectable ----C- 0 100 100 000 -
199 UDMA_CRC_Error_Count -OSRCK 0 200 200 000 -
SMART Status PASSED
Model Family Seagate Pipeline HD 5900.2
Device Model ST3500312CS
Serial Number 6VVF743Q
LU WWN Device Id 5 000c50 04a21645f
Firmware Version SC13
User Capacity 500,107,862,016 bytes [500 GB]
Sector Size 512 bytes logical/physical
Rotation Rate 5900 rpm
Device is In smartctl database [for details use: -P show]
ATA Version is ATA8-ACS T13/1699-D revision 4
SATA Version is SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is Wed Mar 1 23:50:55 2017 GMT
SMART support is Available - device has SMART capability.
SMART support is Enabled
Attributes
ID Name Flags Raw Value Value Worst Threshold Life Left Notes
1 Raw_Read_Error_Rate POSR-- 148492950 117 099 006 -
3 Spin_Up_Time PO---- 0 097 097 000 -
4 Start_Stop_Count -O--CK 3126 097 097 020 97% -
5 Reallocated_Sector_Ct PO--CK 0 100 100 036 100% -
7 Seek_Error_Rate POSR-- 55467624 077 060 030 -
9 Power_On_Hours -O--CK 2440 098 098 000 98% -
10 Spin_Retry_Count PO--C- 0 100 100 097 100% -
12 Power_Cycle_Count -O--CK 1563 099 099 020 99% -
184 End-to-End_Error -O--CK 0 100 100 099 -
187 Reported_Uncorrect -O--CK 0 100 100 000 -
188 Command_Timeout -O--CK 0 100 100 000 -
189 High_Fly_Writes -O-RCK 0 100 100 000 -
190 Airflow_Temperature_Cel -O---K 27 073 (27°C) 043 (57°C) 045 (55°C) In_the_past
194 Temperature_Celsius -O---K 27 027 057 000 -
195 Hardware_ECC_Recovered -O-RC- 148492950 048 036 000 -
197 Current_Pending_Sector -O--C- 0 100 100 000 -
198 Offline_Uncorrectable ----C- 0 100 100 000 -
199 UDMA_CRC_Error_Count -OSRCK 0 200 200 000 -