• The forum software that supports hummy.tv will be upgraded to XenForo 2.3 on Wednesday the 20th of November 2024 starting at 7pm

    There will be some periods where the forum is unavailable, please bear with us. More details can be found in the upgrade thread.

[fix-disk] umount: can't umount /mnt/hd2: Device or resource busy

MymsMan

Ad detector
I have acquired a single failed sector on the disk but it has reduced system response time to a crawl so I am attempting to run fix-disk but it is failing
Code:
Please select option: 1
Any additional options (or press return for none):
Are you sure you wish to run the hard disk checker? [Y/N] y
Running /bin/fix-disk
Custom firmware version 3.03


Checking disk sda

Partition /dev/sda1 is already unmounted
umount: can't umount /mnt/hd2: Device or resource busy

Press return to continue:
What can I do to get fix-dik to be able to unmount /mnt/hd2
 
Code:
ID     Name     Flags     Raw Value     Value     Worst     Threshold     Life Left     Notes
1     Raw_Read_Error_Rate     POSR--     202618320     089     088     006         -
3     Spin_Up_Time     PO----     0     097     097     000         -
4     Start_Stop_Count     -O--CK     8898     092     092     020     90%     -
5     Reallocated_Sector_Ct     PO--CK     0     100     100     036     100%     -
7     Seek_Error_Rate     POSR--     1143430498     090     060     030         -
9     Power_On_Hours     -O--CK     20281     077     077     000     77%     -
10     Spin_Retry_Count     PO--C-     0     100     100     097     100%     -
12     Power_Cycle_Count     -O--CK     4449     096     096     020     95%     -
184     End-to-End_Error     -O--CK     0     100     100     099         -
187     Reported_Uncorrect     -O--CK     2052     001     001     000         -
188     Command_Timeout     -O--CK     0     100     100     000         -
189     High_Fly_Writes     -O-RCK     0     100     100     000         -
190     Airflow_Temperature_Cel     -O---K     37     063 (37°C)     042 (58°C)     045 (55°C)         In_the_past
194     Temperature_Celsius     -O---K     37     037     058     000         -
195     Hardware_ECC_Recovered     -O-RC-     202618320     049     039     000         -
197     Current_Pending_Sector     -O--C-     1     100     100     000         -
198     Offline_Uncorrectable     ----C-     1     100     100     000         -
199     UDMA_CRC_Error_Count     -OSRCK     0     200     200     000         -
Self-test logs
No.     Description     Status     Remaining     When     First Error LBA
# 1     Short offline     Completed: read failure     90%     20281     676637060
# 2     Short offline     Completed: read failure     90%     20281     676637060
# 3     Short offline     Completed without error     00%     17504     -
# 4     Short offline     Completed: read failure     90%     17504     665332974
# 5     Short offline     Completed: read failure     90%     17502     665332974
# 6     Short offline     Completed: read failure     90%     17502     665332974
Rendered in: 0.921 seconds
 
I finally succeeded in getting fix-disk to work by using the Maintenance Mode option from the Webif diag panel instead of the Reboot to Maintenance Mode option from Telnet - not sure why there should be a difference.

The bad sector turned out to be in redring.log which would probably explain why there was a long hang every time a recording started or finished
 
Back
Top