I'll check the signal strength and quality the next time it happens.
In the meantime I kicked off another fix-disk about 40 minutes ago and it hasn't moved on from "Running short disk self test - Waiting... 0" (see below). Does that sound normal? (it's a 2TB drive)
The front display says...
Sorry I should have said - I did run fix-disk a couple of weeks ago.
By "TV signal not recognised" I mean I got the "no signal" message that is displayed for example when the aerial cable is not connected.
According to the document linked above (thanks!), a Reallocated_Sector_Ct of 5 or more means it's time to replace the drive. Since mine is showing as 16 (see screenshot below) - I guess it's time to replace it?
I've also had a couple of occasions in the last fortnight where the TV signal was not...
I've just had the following faults reported on my 2TB HDD, having also noticed that at least one scheduled recording didn't happen last night:
197
Current_Pending_Sector
-O--C-
288
099
099
000
-
198
Offline_Uncorrectable
----C-
288
099
099
000
-
199
UDMA_CRC_Error_Count
-OSRCK
0
200...
When I turned on the Fox T2 it seemed to have reset itself to factory settings - I was prompted to enter display ratio, retune the channels, etc. It had also lost the recording schedule, LAN settings, etc.
I reset the LAN settings and used the web UI to restore the box, then rebooted. When it...
In the last day none of my recordings have been playable - when I play them back the screen goes dark for a few seconds, then I'm bounced back to the media list. I also can't rewind the live buffer - when I press rewind button it just keeps skipping back to the live broadcast.
Older recordings...
I want to use IFTT to skip ads and turn subtitles on/off. Can anyone direct me to the correct HTTP commands for these operations?
I thought I'd saved a list of them somewhere, but can't find it
Thanks. So I ran rs/sync (output below), but my Remote Scheduler console is still completely blank
???
humax# diag rs/sync
Running: rs/sync
Sending channel information to remote server.
Already up-to-date.
Sending disk information to remote server.
Updating...
Sending disk error information...
I have replaced my HDR-Fox T2 with a new box (but kept the HDD from the old machine). I now need to register the new device with the Remote Scheduling service. So I went to https://rs.hpkg.tv/ and removed my old device. I then went into Settings on the Web IF of the new machine and registered...
It's been reporting the same failed recording for the last week, so I'm guessing it should have refreshed by now?
humax# pwd
/media/My Video
humax# find . -name "Shop Well for Less_20180919_2006.hmt"
humax#
I did try the find command (which I believe is recursive?) in the /media/My Video folder but it returned no results:
humax# find . -name "Shop Well for Less_20180919_2006.hmt"
humax#
Here's the error report from rs.hpkg.tv:
And here's the output from "ls -la":
humax# cd /media
humax# ls
Asus My Music My Photo My Video drive1 foxsat
humax# cd "My Video"
humax# ls -la *.hmt
-rw-r--r-- 1 root root 2072 Oct 28 2018 8 Out of 10 Cats Does...
I've copied and pasted the results of ls -la *.hmt into a text editor, then searched for the hmt file using the exact filename copied and pasted from rs.hpkg.tv. Nada.
???
OK so ls -la returns a complete list of files in /media/My Video. The episode in question is not among them. I ran the same command in the folder for the series (/media/My Video/series name) and it listed other episodes, but not the one that is reported as failed
???
That was what I was expecting to be able to do, but there is no .hmt (or any other file) for that episode anywhere on the Humax HDD (I'm browsing it via SMB on a Windows machine).
???
Every day I get a message from Hummypkg Remote Scheduling advising me that a specific recording has failed. Every day I delete the message from https://rs.hpkg.tv/, but it re-appears the next day. The recording in question is nowhere to be found on my Humax (HDR-Fox T2 with custom firmware)...
I'll check the signal strength and quality the next time it happens.
In the meantime I kicked off another fix-disk about 40 minutes ago and it hasn't moved on from "Running short disk self test - Waiting... 0" (see below). Does that sound normal? (it's a 2TB drive)
The front display says...
Sorry I should have said - I did run fix-disk a couple of weeks ago.
By "TV signal not recognised" I mean I got the "no signal" message that is displayed for example when the aerial cable is not connected.
According to the document linked above (thanks!), a Reallocated_Sector_Ct of 5 or more means it's time to replace the drive. Since mine is showing as 16 (see screenshot below) - I guess it's time to replace it?
I've also had a couple of occasions in the last fortnight where the TV signal was not...
I've just had the following faults reported on my 2TB HDD, having also noticed that at least one scheduled recording didn't happen last night:
197
Current_Pending_Sector
-O--C-
288
099
099
000
-
198
Offline_Uncorrectable
----C-
288
099
099
000
-
199
UDMA_CRC_Error_Count
-OSRCK
0
200...
When I turned on the Fox T2 it seemed to have reset itself to factory settings - I was prompted to enter display ratio, retune the channels, etc. It had also lost the recording schedule, LAN settings, etc.
I reset the LAN settings and used the web UI to restore the box, then rebooted. When it...
In the last day none of my recordings have been playable - when I play them back the screen goes dark for a few seconds, then I'm bounced back to the media list. I also can't rewind the live buffer - when I press rewind button it just keeps skipping back to the live broadcast.
Older recordings...
I want to use IFTT to skip ads and turn subtitles on/off. Can anyone direct me to the correct HTTP commands for these operations?
I thought I'd saved a list of them somewhere, but can't find it
Thanks. So I ran rs/sync (output below), but my Remote Scheduler console is still completely blank
???
humax# diag rs/sync
Running: rs/sync
Sending channel information to remote server.
Already up-to-date.
Sending disk information to remote server.
Updating...
Sending disk error information...
I have replaced my HDR-Fox T2 with a new box (but kept the HDD from the old machine). I now need to register the new device with the Remote Scheduling service. So I went to https://rs.hpkg.tv/ and removed my old device. I then went into Settings on the Web IF of the new machine and registered...
It's been reporting the same failed recording for the last week, so I'm guessing it should have refreshed by now?
humax# pwd
/media/My Video
humax# find . -name "Shop Well for Less_20180919_2006.hmt"
humax#
I did try the find command (which I believe is recursive?) in the /media/My Video folder but it returned no results:
humax# find . -name "Shop Well for Less_20180919_2006.hmt"
humax#
Here's the error report from rs.hpkg.tv:
And here's the output from "ls -la":
humax# cd /media
humax# ls
Asus My Music My Photo My Video drive1 foxsat
humax# cd "My Video"
humax# ls -la *.hmt
-rw-r--r-- 1 root root 2072 Oct 28 2018 8 Out of 10 Cats Does...
I've copied and pasted the results of ls -la *.hmt into a text editor, then searched for the hmt file using the exact filename copied and pasted from rs.hpkg.tv. Nada.
???
OK so ls -la returns a complete list of files in /media/My Video. The episode in question is not among them. I ran the same command in the folder for the series (/media/My Video/series name) and it listed other episodes, but not the one that is reported as failed
???
That was what I was expecting to be able to do, but there is no .hmt (or any other file) for that episode anywhere on the Humax HDD (I'm browsing it via SMB on a Windows machine).
???
Every day I get a message from Hummypkg Remote Scheduling advising me that a specific recording has failed. Every day I delete the message from https://rs.hpkg.tv/, but it re-appears the next day. The recording in question is nowhere to be found on my Humax (HDR-Fox T2 with custom firmware)...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.