Your maths is correct (see post 9) As that is the block address in relation to the start of /dev/sda2. 37821812 was a typo (I copied and pasted the command straight from an example to save time). The actual LBA I used was 809774301 which is correct for /dev/sda as the device. Also dd isn't...
Interesting addendum - After running a check with debugfs I was able to find out what file was residing on the bad sector in question :
Humax HDR-Fox T2 (humax) 1.02.29/2.14
To return to the menu, type: exit
humax# tune2fs -l /dev/sda3 | grep Block
Block count: 2622611
Block...
Right, have ran fix-disk twice in succession plus have attempted repair on both noted errors (see below) using smartctl :
Ran "smartctl -t offline /dev/sda" for the offline_uncorrectable
"smartctl -t long /dev/sda" followed by "smartctl -l selftest /dev/sda" to get the LBA of the bad sector...
We don't believe the recordings are a lost cause, mainly as the pixelling/stopping is happening on recordings that were previously fine AND they're stopping/pixelling at different points each playback. I think the suspected "bad sector" which showed up on the SMART status screen may well be the...
Thank you for the quick replies!
The SMART status log is showing two errors, one on OFFLINE_UNCORRECTABLE and the other one on CURRENT_PENDING_SECTOR. I'll login later this evening via telnet and attempt repair and re-allocation using smartctl and come back to you with the results.
If the...
Hi there,
My parents are currently having an issue with their 1TB Humax HDR-FOX T2 following a 3/4 week break away. The unit was left plugged in and attached to the aerial so that it could continue recording while they were away. On return, they found that programs that should have recorded...
Your maths is correct (see post 9) As that is the block address in relation to the start of /dev/sda2. 37821812 was a typo (I copied and pasted the command straight from an example to save time). The actual LBA I used was 809774301 which is correct for /dev/sda as the device. Also dd isn't...
Interesting addendum - After running a check with debugfs I was able to find out what file was residing on the bad sector in question :
Humax HDR-Fox T2 (humax) 1.02.29/2.14
To return to the menu, type: exit
humax# tune2fs -l /dev/sda3 | grep Block
Block count: 2622611
Block...
Right, have ran fix-disk twice in succession plus have attempted repair on both noted errors (see below) using smartctl :
Ran "smartctl -t offline /dev/sda" for the offline_uncorrectable
"smartctl -t long /dev/sda" followed by "smartctl -l selftest /dev/sda" to get the LBA of the bad sector...
We don't believe the recordings are a lost cause, mainly as the pixelling/stopping is happening on recordings that were previously fine AND they're stopping/pixelling at different points each playback. I think the suspected "bad sector" which showed up on the SMART status screen may well be the...
Thank you for the quick replies!
The SMART status log is showing two errors, one on OFFLINE_UNCORRECTABLE and the other one on CURRENT_PENDING_SECTOR. I'll login later this evening via telnet and attempt repair and re-allocation using smartctl and come back to you with the results.
If the...
Hi there,
My parents are currently having an issue with their 1TB Humax HDR-FOX T2 following a 3/4 week break away. The unit was left plugged in and attached to the aerial so that it could continue recording while they were away. On return, they found that programs that should have recorded...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.