I have nfs-
I have nfs-utils package installed too, as this is what I thought the mac used until samba was mentioned. Doesn't work with nfs or samba, unless i need to configure them somehow?
I have the samba server installed on the humax but i don't know how to configure it - i have never used Linux, despite being an embedded software engineer for over 30yrs. I don't have a dnla client installed on my mac. I presumed i could use the mac to browse the files on my humax without...
Hi,
Trying to connect to humax from macbook but fails. Humax icon appears in macbook "network" but when i click to connect i get "connection failed". If i "connect as" instead then i get "There was a problem connecting to the humax. The version of the server you are trying to connect to is not...
Buy a new hdd. Not worth the hassle or the risk in trying to prolong the life of your hdd with the poblems yours is exhibiting. Brand new 1TB seagate replacement for £43.
My general point is why have the alert threshold default lower than the default fan trigger point? Yes, i have now adjusted the fan to 40% and all is good. As for fan noise, i can only hear mine if my ear is pressed against the humax.
Thanks for the info. Installed the package out of curiosity. I will probably use it short-term at the 40% setting to keep my hdd cool, until the new one arrives.
But leaving at 0% does seem to give standard Humax software behaviour, but you seem to be saying that standard behaviour does not apply when this package is installed? I installed the package just in case i wanted to change the behaviour assuming that if i did not change the setting then i...
Understood. However, the graph does show the temperature falling at the same point as it "predicts" the fan is running, so this at least shows the fan is working.
Hi,
I am using CF 3.13 and my Humax display is showing "Too Hot 54C" and flashing red/blue. I have ordered a new hard disk as i know this drive is failing (see other thread). However, i have a couple of questions regarding the hdd temp and fan ...
The CF tempmon 'alert' setting is at its...
By brutal, i meant in terms of erasing data - of course it only recreates the fs and i never expected it to fix hdd problems. What makes you think i don't have any hardware data? Don't make assumptions! I have been monitoring the SMART stats over the last few weeks. In my experience once hard...
I did try fix-disk last night via a telnet session and i got loads and loads of LBA errors and i kept getting prompted for y/n on each one which was frustrating. Eventually it all hanged so tried again and same issue so I had enough of that and opted to reformat and see what happens. I will try...
You seem a bit miffed that i having tried the routines in the cfw.
The hdd is backed up so i don't care if i lose data on the hdd, hence why I tried a more brutal format followed by a hdd test which failed.
Having been a s/w engineer for over 30yrs, experience tells me the drive is on its last...
Thanks all. Using the standard Humax gui menu, i have reformatted my suspect old hdd and then ran the hdd test from the same menu. I got error 8 and was instructed to format the hdd again. I reformatted again and the subsequent hdd test gave error 10 and instructed me to reformat. I guess this...
Hi,
My HDD is old and knackered so i want to replace it with a 1TB HDD, perhaps larger. Can anyone answer these questions:
- if i backup the encrypted files on my old hdd and restore them on my new hdd, will they work? Is the encryption linked to the drive or to the main pcb?
- i presume that...
I have nfs-
I have nfs-utils package installed too, as this is what I thought the mac used until samba was mentioned. Doesn't work with nfs or samba, unless i need to configure them somehow?
I have the samba server installed on the humax but i don't know how to configure it - i have never used Linux, despite being an embedded software engineer for over 30yrs. I don't have a dnla client installed on my mac. I presumed i could use the mac to browse the files on my humax without...
Hi,
Trying to connect to humax from macbook but fails. Humax icon appears in macbook "network" but when i click to connect i get "connection failed". If i "connect as" instead then i get "There was a problem connecting to the humax. The version of the server you are trying to connect to is not...
Buy a new hdd. Not worth the hassle or the risk in trying to prolong the life of your hdd with the poblems yours is exhibiting. Brand new 1TB seagate replacement for £43.
My general point is why have the alert threshold default lower than the default fan trigger point? Yes, i have now adjusted the fan to 40% and all is good. As for fan noise, i can only hear mine if my ear is pressed against the humax.
Thanks for the info. Installed the package out of curiosity. I will probably use it short-term at the 40% setting to keep my hdd cool, until the new one arrives.
But leaving at 0% does seem to give standard Humax software behaviour, but you seem to be saying that standard behaviour does not apply when this package is installed? I installed the package just in case i wanted to change the behaviour assuming that if i did not change the setting then i...
Understood. However, the graph does show the temperature falling at the same point as it "predicts" the fan is running, so this at least shows the fan is working.
Hi,
I am using CF 3.13 and my Humax display is showing "Too Hot 54C" and flashing red/blue. I have ordered a new hard disk as i know this drive is failing (see other thread). However, i have a couple of questions regarding the hdd temp and fan ...
The CF tempmon 'alert' setting is at its...
By brutal, i meant in terms of erasing data - of course it only recreates the fs and i never expected it to fix hdd problems. What makes you think i don't have any hardware data? Don't make assumptions! I have been monitoring the SMART stats over the last few weeks. In my experience once hard...
I did try fix-disk last night via a telnet session and i got loads and loads of LBA errors and i kept getting prompted for y/n on each one which was frustrating. Eventually it all hanged so tried again and same issue so I had enough of that and opted to reformat and see what happens. I will try...
You seem a bit miffed that i having tried the routines in the cfw.
The hdd is backed up so i don't care if i lose data on the hdd, hence why I tried a more brutal format followed by a hdd test which failed.
Having been a s/w engineer for over 30yrs, experience tells me the drive is on its last...
Thanks all. Using the standard Humax gui menu, i have reformatted my suspect old hdd and then ran the hdd test from the same menu. I got error 8 and was instructed to format the hdd again. I reformatted again and the subsequent hdd test gave error 10 and instructed me to reformat. I guess this...
Hi,
My HDD is old and knackered so i want to replace it with a 1TB HDD, perhaps larger. Can anyone answer these questions:
- if i backup the encrypted files on my old hdd and restore them on my new hdd, will they work? Is the encryption linked to the drive or to the main pcb?
- i presume that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.