I'm not sure my problem is the same as that in the 'Suddenly started crashing on channel 85 (RT) 12th June 2014 - why now?' thread so...
We have three boxes, all of them running the 3.00 customised firmware, all connected to the network through identical homeplug adapters, two of the boxes booting into channel 107, the other into 101 and, despite the odd freeze from time-to-time, they've been fine. However, we're currently getting spontaneous reboot problems on all of them, usually, but not always, within 60 or so seconds of turning them on with the remote.
The boxes appear to boot up normally but soon the picture freezes with sound continuing, 'Crash' appears on the front panel followed by 'rebooting in [counting down] seconds'. This reboot is faster than the usual one from a cold start. The boxes are usually stable after that, though there have been some second crashes (like just now after three minutes!). Put them into standby with the remote and return a few minutes later and the crashes start all over again.
The only recent changes have been the installation of 'disable-dso' (which I've now removed without a resolution) and a new router on the network with addresses in the 1923168.178.??? range instead of 192.168.1.??? (all boxes have picked up their new addresses).
Can anyone offer an explanation and a fix? Would posting the content of the various log files from 'Diag'? If so, which?
We have three boxes, all of them running the 3.00 customised firmware, all connected to the network through identical homeplug adapters, two of the boxes booting into channel 107, the other into 101 and, despite the odd freeze from time-to-time, they've been fine. However, we're currently getting spontaneous reboot problems on all of them, usually, but not always, within 60 or so seconds of turning them on with the remote.
The boxes appear to boot up normally but soon the picture freezes with sound continuing, 'Crash' appears on the front panel followed by 'rebooting in [counting down] seconds'. This reboot is faster than the usual one from a cold start. The boxes are usually stable after that, though there have been some second crashes (like just now after three minutes!). Put them into standby with the remote and return a few minutes later and the crashes start all over again.
The only recent changes have been the installation of 'disable-dso' (which I've now removed without a resolution) and a new router on the network with addresses in the 1923168.178.??? range instead of 192.168.1.??? (all boxes have picked up their new addresses).
Can anyone offer an explanation and a fix? Would posting the content of the various log files from 'Diag'? If so, which?