• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

Full install needed (again)

S

Sargan

Member
This morning, powered on … and it started with the full set up .. SCREEN. 1 ..language selection, etc.
Loses all configuration & schedules.
What causes this, happened a few times now.

HD diagnostics attached.. also attach latest log entry …. It shows I shut it down at 0038
The system booted at 04:17 … no idea what this is, nobody was using the box at that time.
 

Attachments

  • IMG_1641.png
    IMG_1641.png
    439 KB · Views: 5
  • IMG_1642.jpeg
    IMG_1642.jpeg
    119.6 KB · Views: 3
Last edited:
Is this the startup reverting to the Installation Wizard you're talking about?
If so, I don't think it's necessary to do a full install, but there are a few, maybe up to ten, questions to answer.
It may be useful to know which version of the custom firmware you're currently on, if it's been recently updated etc.
 
Last edited:
bottletop said:
Is this the startup reverting to the startup Wizard you're talking about? If so, I don't think it's necessary to do a full install, but there are a few, maybe up to ten, questions to answer. It may be useful to know what version of the custom firmware you're currently on, if it's been recently updated etc.
Click to expand...
 
04:17 is the usual OTA firmware update search.
Cause of the Install Wizard is suspected to be either corrupt database in the flash storage or corruption of the flash filesystem itself.
Install the System Flush image from the Wiki to remake the flash filesystem - you will lose everything stored in the flash and will need to run the fix-flash-packages diagnostic to restore it, as well as any configuration settings therein e.g. for ir, tunefix, newk, undelete, fan, boot-settings, dlna-servername and any custom encryption key.
The hard disk is irrelevant, as is the CF version, although 3.14 is recommended.
 
OK .. installed & run the system flush file - reported success
Run fix-flash-packages That completed
Not sure what you mean by the next step.
I have packages installed : IR, tunefix, newk, undelete, boot-settings they show as currently installed, do I have to do anything to them ?
 
Sargan said:
I have packages installed : IR, tunefix, newk, undelete, boot-settings they show as currently installed, do I have to do anything to them ?
Click to expand...
Configure their settings as required. It depends what you had done to them before, but only you will know that.
 
You must log in or register to reply here.
Back
Top