HDMI output "disappearing" after a few days

peterh337

Member
I finally replaced my 16 year old Sony TV with a flash new LG OLED48C64LA.

On this stupid TV there is basically no way (short of some software hack, which I will investigate) of simply selecting HDMI1 input! One can eventually get there by trying loads of menus. The stuff on google is all different; LG change the menus around every few months. It is also possible to do it by scrolling through a long horizontal list of apps (e.g. youtube) and HDMI1 appears in that list. I also found a long setup sequence where you make it select, at power-up, the last input used, which gets near what I want.

The problem is that HDMI1 appears anywhere only if the Humax HDMI output is "alive". The TV has six HDMI sockets and fairly obviously it presents only ones that currently have a "live" (whatever that means) device on them.

And the Humax sometimes just appears "dead". To fix that, I have to power cycle it. I have disabled auto power off in it.

Is there some solution?
 
Sounds like it might be a "deadly embrace". The Humax requires HDCP negotiation before it enables HDMI output, but the telly wants to see a signal before you can select that input.

There is a wire on the HDMI for detection. If the telly responds to that, it might be possible to hard-wire it permanently on.
 
I have used the Humax with several LG models without problem, the latest TV no longer recognised the HDR T2 as a known model and I ended up picking "Humax DVD player" which allows control of the Humax with the LG remote
 
On the LG C6 I have, on the remote itself, next to the round cursor, there's a button labelled "input" in grey text on the darker grey casing (just to make it difficult to see!). Anyway press it and you get a scrolling list of inputs, at least on mine devices that have been connected but are not currently switched on appear greyed out but can be selected

I dont know if that will trigger power on though, that may need CEC enabled.
 
The TV is complex and no doubt there is a ton of hidden config somewhere. I have yet to hit the LG forums... but life is too short. The problem is that even if one brought the humax to the shop, one could not check this stuff.

There might be a "HDMI box" which sorts this out (HDMI splitter?).
 
I have no such button, but I read elsewhere
that old remotes had an input selector button. I see you can still buy these on amazon (3rd party; LG removed that button recently) so I will try that.

The TV definitely suppresses any indication of HDMI1 once the Humax on it has gone to "sleep". I am going to mod the humax with an on/off switch on the back so I can restore HDMI function.
 
I read through your other thread now. I also have an older lg c1 with older magic remote. The input button on the C1 reverses the actions, short press brings up the scrolling list of inputs, long press brings up the home hub.
 
Yes my remote has that button with the little house and a circle around it, but that still brings up HDMI1 as a "Recent" thing, and it doesn't appear if it doesn't see the Humax on it.

In short, there seems no way to make the LG TV simply "stuck" on HDMI1 - like the old Sony TV was. That "just worked".
 
the "recent" thing is on the hub after a short press, if instead you just hold the key a horizontal scrolling list of tv/inputs comes up instead of the hub
 
Sure, but HDMI1 doesn't always appear. That is the whole problem. Otherwise - unless somebody has been messing with the TV itself - HDMI1 would always appear on bottom left of the "home screen", for ever.
 
So it does work sometimes for you?

Just to test I've shifted my humax from the receiver to HDMI1 on the TV and it's working through several on/off cycles of different combinations.

The TV is set to go to last input, HDMI SIMPLINK is on, Deep Colour is off, Quick Startup is off.

On the input bar the HDMI1 box is white if Humax is already on, grey otherwise. Box always has a tick although it shifts positions when on/off

I wonder if defining an actual set top box of some type like, MymsMan suggests, would affect the behaviour.
 
Back
Top