Engeeaitch
New Member
Hi - I have recently picked up a second hand unit to use as a spare. It seems to work fine for some of the time, but then starts to act as if there is a phantom remote control in the room, with channel changes (up and down), shutdowns, startups and volume changes.
Here is what I have done:
- Read the "Steps for Resolving HDR-FOX Crash/Reboot Issues"
- Removed channels > 800 and duplicate channels
- Removed the network cable
- Unplugged the hard drive (power and data)
- Put a box in front of the front panel (just in case there is a rogue remote control signal)
- Swapped the front panel with my working Humax
- Checked the power supply voltage - which seems similar to my working Humax (6.52V & 12.29V)
I can't think of anything else other than the motherboard - but just wanted to check to see if anyone else had any ideas please? Thanks for any help.
Here is my system information:
Web interface version: 1.3.2-5
Custom firmware version: 3.10 (build 2734)
Humax Version: 1.03.12 (kernel HDR_CFW_3.10)
Loader Version: a7.30
Here is what I have done:
- Read the "Steps for Resolving HDR-FOX Crash/Reboot Issues"
- Removed channels > 800 and duplicate channels
- Removed the network cable
- Unplugged the hard drive (power and data)
- Put a box in front of the front panel (just in case there is a rogue remote control signal)
- Swapped the front panel with my working Humax
- Checked the power supply voltage - which seems similar to my working Humax (6.52V & 12.29V)
I can't think of anything else other than the motherboard - but just wanted to check to see if anyone else had any ideas please? Thanks for any help.
Here is my system information:
Web interface version: 1.3.2-5
Custom firmware version: 3.10 (build 2734)
Humax Version: 1.03.12 (kernel HDR_CFW_3.10)
Loader Version: a7.30