Regular crashes on specific channels

P

Petethefeet

New Member
My HDR-FOX T2 cf 1.03.12 appears to have taken a dislike to commercial channels. It runs and records without problems on BBC 1, 2, 3 and 4, both SD and HD, and Channel 5. But when I switch to ITV1 and Channel 4 SD or HD it crashes within approx 1 minute. This behaviour loop repeats after self-rebooting. Recordings on these channels also fail.

I had hoped to fix the problem by installing the latest cf mod HDR_FOX_T2_1.03.12_mod_3.14. The update was reported as successfully installed, however I'm not sure the firmware upgrade was succesful judging by the attached screenshot and the fact that I can't install the Advanced Web Interface using telnet or the simple web interface.

The machine had been working fine since the original cf upgrade some 5 years ago. Looking through the pinned posts about known crash issues I can't see anything that matches my issue, so I'd be grateful for any suggestions.


IMG_0721.jpeg
 
The Customised Firmware does not change the underlying Humax firmware level which that screen is showing.
The CF level is shown during boot up on the Orange VFD display.

You should not need to reinstall the webif if you had it working previously, what are you trying to do and what messages are you seeing.

Are/ were you using detectads on the commercial channels/
 
You must log in or register to reply here.
Back
Top