Starbase
Member
Its been a while since I used the Remote Scheduling Facility, I have now started using it again and I am having problems. After logging in the Home page correctly shows my active schedule, but when I go to EPG (Guide) it only displays a few radio stations?
I have searched the Forum, and found discussions with possible solutions on this problem:-
"Your Humax sends the region information to the Remote Server at the same time that it sends the other details stored on your Humax, try Web-If >> Diagnostics >> Run Diagnostic rs/sync >> Run, Other Remote Scheduling commands from the Wi-Ki that may be needed are below :-
Any help would be greatly aprechiated
I have searched the Forum, and found discussions with possible solutions on this problem:-
"Your Humax sends the region information to the Remote Server at the same time that it sends the other details stored on your Humax, try Web-If >> Diagnostics >> Run Diagnostic rs/sync >> Run, Other Remote Scheduling commands from the Wi-Ki that may be needed are below :-
- rs/chanpush = Initiates an instant send of channel information to Remote Scheduling server
- rs/checkin = force a Remote Schedule update with :- /mod/sbin/rs_process now
- rs/diskpush = Initiates an instant send of 'Full' HDD inventory to Remote Scheduling server
- rs/muxdump = runs /mod/bin/rs epg
- rs/push = sends TBL_RESERVATION schedule and pending schedule data to RS Server
- rs/sync = clear the local state cache and synchronize everything"
Any help would be greatly aprechiated