Request for your transmitter/tuning info.

prpr

Well-Known Member
I'm attempting an information collecting exercise to help with the tunefix-update package (but you don't need to have tunefix-update installed though).
This request is for MAIN transmitters only. Please ignore if you receive from a relay transmitter.

If you can help, please could you run the "txinfo" diagnostic from the WebIf's Diagnostic page and then either copy/paste the info. generated here in this thread or, if you'd rather not give away your region, put it in a PM (Conversation) to me.
Include the name of the transmitter you (think you) are receiving from.
e.g. mine for Mendip looks like
Running: txinfo
3|33|0
3|35|0
3|48|0
3|49|0
3|51|0
3|52|0
3|54|0
3|56|0
3|58|0
3|12346|West

I'm especially interested in the following transmitters:
Bluebell Hill
Dover
Heathfield
Tunbridge Wells
Midhurst
Whitehawk Hill

Bilsdale
Selkirk
Caldbeck
Craigkelly
Black Hill/Darvel/Torosay/Rosneath
Durris
Angus
Douglas
Olivers Mount

but not at all in these:
Mendip
Wenvoe
Emley Moor
Belmont
Waltham
Pontop Pike/Chatton
Hastings

All the rest (I won't list them!) would be useful but not essential.

To avoid unnecessary duplication, please don't post if someone has already done your transmitter.

Thanks.
 
Last edited:
Glad to help.

Winter Hill

1|31|0
1|37|0
1|49|0
1|50|0
1|54|3
1|55|0
1|56|0
1|57|0
1|58|0
1|59|0
1|12330|North West
 
Rowridge IOW

Running: txinfo
1|21|2
1|22|2
1|24|0
1|25|0
1|27|0
1|28|0
1|29|0
1|31|0
1|37|0
1|12340|South
 
Primary Sudbury
1|41|0
1|44|0
1|47|0
1|56|0
1|58|0
1|60|3
1|12321|East Anglia

Secondary Crystal Palace
4|29|3
4|33|0
4|35|0
4|12339|London
 
Norwich
1|31|0
1|37|0
1|39|2
1|42|0
1|45|0
1|50|0
1|55|3
1|57|0
1|59|3
1|12321|East Anglia
 
Sutton Coldfield

Running: txinfo
1|39|2
1|40|2
1|42|0
1|43|0
1|45|0
1|46|0
1|51|0
2|33|0
2|35|0
1|12325|West Midlands
2|12357|Com78 National
 
Crystal Palace
1|22|0
1|23|0
1|25|0
1|26|0
1|28|3
1|29|3
1|30|3
1|33|0
1|35|0
1|12339|London
 
A slightly different Winter Hill

Running: txinfo
1|49|0
1|50|0
1|54|3
1|55|0
1|56|0
1|57|0
1|58|0
1|59|0
2|37|0
1|12330|North West
2|12357|Com78 National
 
I ran it on Hastings but won't post as you don't want it, but what does it all mean, especially the ones with the big number in the second column?
 
Too late :rolleyes: :laugh:
Tacolneston!
A slightly different Winter Hill
You don't have COM7 on your box for some reason. Yours is different because you've done a retune for COM8 whereas Wallace hasn't.
I ran it on Hastings but won't post as you don't want it, but what does it all mean, especially the ones with the big number in the second column?
I already had your tuning DB to confirm the details!
The first set of rows are Index|RF channel|Offset flag. The second set are Index|Service ID|Region name.
Index just ties the two sets together (relational database standard stuff). RF channel and Region name are fairly self-explanatory. Offset flag is 3 if your TX's frequency is offset down by 167 kHz, 2 if offset up by 167 kHz and 0 obviously for no offset. I didn't know this until yesterday but had been musing about how it was done up to that point! I doubt there will be any other values, but you never know until you see the data.
Service ID is a regionalisation indicator - different TXs have different combinations of services (programmes or ads. or both) on certain muxes. so need different identifiers. Com78 National is a new 'region' which is being used for the SFN being introduced on COM7 and COM8, and will be the same across the UK. You can't have an SFN with different content in the mux., which is how it was before between different regions, hence the change a week or two ago.
 
Rowridge:

Running: txinfo
1|21|2
1|22|2
1|24|0
1|25|0
1|27|0
1|28|0
1|29|0
2|31|0
2|37|0
1|12340|South
2|12357|Com78 National

[...slightly different from the earlier Rowridge output]
 
But it is different to the already provided data...................
Edit
OK, Posts crossed.
 
Last edited:
The first set of rows are Index|RF channel|Offset flag. The second set are Index|Service ID|Region name.
Index just ties the two sets together (relational database standard stuff). RF channel and Region name are fairly self-explanatory. Offset flag is 3 if your TX's frequency is offset down by 167 kHz, 2 if offset up by 167 kHz and 0 obviously for no offset. I didn't know this until yesterday but had been musing about how it was done up to that point! I doubt there will be any other values, but you never know until you see the data.
The first set of rows' detail is available from ofcom by downloading the excel workbook or both the CSV files. This may be easier to manipulate into the desired format rather than copying from each post.
https://www.ofcom.org.uk/spectrum/i...tm_medium=email&utm_campaign=700MHz_clearance

But no sign of the service id that I can spot.
 
But no sign of the service id that I can spot
That is the problem!
The first set of rows' detail is available from ofcom by downloading the excel workbook or both the CSV files.
Yes, I know, but I need a way to relate the two and the only reliable way to know what service ID matches which TX is to generate the two bits at the same time.
That also gives a sanity check to what the person says is their region matches reality.
 
Sandy Heath

Running: txinfo
1|21|2
1|24|0
1|27|0
1|48|0
1|51|0
1|52|0
2|32|0
2|34|0
1|12320|Cambs & Beds
2|12357|Com78 National
 
Back
Top