Matthew Shaw
New Member
Hello all
I'm still SO impressed by this community and raydon's web interface etc. Just amazing! So many thanks for years and years of enjoyment.
I've just installed (goodness knows why I've only just done it and not before!) the RS (remote scheduling) on my:
Humax Foxsat HDR with custom firmware
However I've not received any registration email (its a hotmail.com account and its not in my junk either).
So the problem is I can not login to the Remote Scheduling Web Server to do any Remote Scheduling!
I've even tried to perform a password reset where pwreset.html says "Successful - please check your email for further instructions." but no email arrives.
I have though received an email from the RS server:
My web_if plugin settings show:
And the push show:
I wonder what might be wrong? Does anyone have any suggestions?
I've also noticed the "No. of Satellite Feeds" and "Max. Running Recordings", whilst I can set them to be '2', they value isn't remembered when I reload the settings page.
My HDD is 2TB. I use a UPS Power Supply to help prevent hard drive faults due to power cuts etc, as my old HDD died because of that I think.
I've just installed the 'nowsters' patch (very cool!) settop-patch_4.0.9utc_mips.opk. I installed this as I came across it in these forums trying to resolve my RS package problem.
In the Package Management - Available Packages I do NOT see the 'Sweeper' or 'Diagnostic_Utilities' package. I can't find in this forum if these should be available for my Humax Foxsat HDR model or not. I thought I'd mention it as it might be a clue to something not being quite right.
So many thanks for any suggestions
Matthew
I'm still SO impressed by this community and raydon's web interface etc. Just amazing! So many thanks for years and years of enjoyment.
I've just installed (goodness knows why I've only just done it and not before!) the RS (remote scheduling) on my:
Humax Foxsat HDR with custom firmware
Custom Firmware : | v 4.1.3 |
Web Interface : | v 2.89 |
However I've not received any registration email (its a hotmail.com account and its not in my junk either).
So the problem is I can not login to the Remote Scheduling Web Server to do any Remote Scheduling!
I've even tried to perform a password reset where pwreset.html says "Successful - please check your email for further instructions." but no email arrives.
I have though received an email from the RS server:
veFrom: Hummypkg Remote Scheduling <noreply@hpkg.tv>
Sent: 20 September 2020 07:23
To: Hummypkg User <******@hotmail.com>
Subject:RS Failed / Foxsat-HDR (TV - *************)
Device: Foxsat-HDR (TV - *************)
At least one failed recording has been detected in your
media library. The following recording(s) failed:
/ Library/Ballet/The Royal Ballet in The Nutcracker_20111223_1910.ts
/ Library/Ballet/Darcey Bussell's Ten Best____20091127_2001.ts
/ Library/Adult TV/British History Biggest Fibs/British History's Biggest Fibs____20170126_2102.ts
/ Library/Adult Films/Gosford Park.ts
/ Library/Family TV/Open All Hours/s4 4of6 Errand Boy Executi
My web_if plugin settings show:
Registration Status | Active |
---|---|
Custom Visible Channel Count | 179 |
Default Channel Count | 179 |
BBC Region | South/510 |
And the push show:
Push Channels to RS Server | Sending channel information to remote server. Already up-to-date. Pushed channels: 179 channels, 3 favourite groups, 26 favourites |
---|
I wonder what might be wrong? Does anyone have any suggestions?
I've also noticed the "No. of Satellite Feeds" and "Max. Running Recordings", whilst I can set them to be '2', they value isn't remembered when I reload the settings page.
My HDD is 2TB. I use a UPS Power Supply to help prevent hard drive faults due to power cuts etc, as my old HDD died because of that I think.
I've just installed the 'nowsters' patch (very cool!) settop-patch_4.0.9utc_mips.opk. I installed this as I came across it in these forums trying to resolve my RS package problem.
In the Package Management - Available Packages I do NOT see the 'Sweeper' or 'Diagnostic_Utilities' package. I can't find in this forum if these should be available for my Humax Foxsat HDR model or not. I thought I'd mention it as it might be a clue to something not being quite right.
So many thanks for any suggestions
Matthew
Last edited: