Garden Bob
New Member
My HDR-FOX T2 appears to be stuck in Standby, when called the display shows system startup and then goes blank and returns to standby even with no external connections. Any ideas?
Switched it on and off several times, even unplugged it, still the same symptoms.My HDR-FOX T2 appears to be stuck in Standby, when called the display shows system startup and then goes blank and returns to standby even with no external connections. Any ideas?
Just because the HDD seems to work elsewhere, I wouldn't rule it out as the source of your problems. Bung any SATA drive you can get hold of into the HDR and see what happens - the HDR may offer to format it, but you don't have to accept the offer.I disconnected the HDD and the start up process was OK. So I though the HDD had gone down. I then put it into an enclosure and hooked it up to a PC and it seemed OK.