• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

Struggling with HDD format message

If you can't wait for further opinions, I suggest a factory reset to clear out any database errors that might be causing corruption of that partition. If that doesn't help, I'm thinking the HDD is showing signs of imminent failure.

Regarding factory reset, I wrote up details only today - see HERE (click).

Then take it from the top.
 
I'd suggest another maintenance mode disk check. It may show something up. There are other things we can try too if necessary. From what you posted it doesn't look like a typical disk hardware failure although it could just be a failure mode we haven't seen before.


Posted on the move; please excuse any brevity.
 
database errors that might be causing corruption of that partition
Click to expand...
Wow, that's a new one. What in the world does this mean? Or did you just make it up?
What sort of database error can corrupt a partition and how would resetting to defaults fix it?
 
prpr said:
Wow, that's a new one. What in the world does this mean? Or did you just make it up?
What sort of database error can corrupt a partition and how would resetting to defaults fix it?
Click to expand...
So you know exactly how the humaxtv process controls the accesses to the TSR circular buffer then, for example? No?? Thought not.

I don't either, but there must be some parameters stored somewhere, and ditto for other data structures. A non-destructive baseline reset seems like a good starting point.
 
Hi,
Decided to send the box back to amazon and probably better to remove the CFW before.
Tried using the diag option and "remove_mod_yes_i_am_sure". didn't work ... this is what I get:
Code: 
Press return to continue:

      /-------------------------\
      |  T E L N E T   M E N U  |
      \-------------------------/

  [ Humax HDR-Fox T2 (humax) 1.02.29/2.15 ]

  Note: Some areas of the hard disk are not mounted.
        Not all functions will be available.

    1 - Restart into maintenance mode.
    2 - Remove web interface password.
 stat - Show what the box is currently doing.
    x - Exit and close connection.
 diag - Run a diagnostic.
  cli - System command line (advanced users).

Please select option: diag

Enter the diagnostic name (or press return to cancel): remove_mod_yes_i_am_sure
Are you sure you wish to run diagnostic 'remove_mod_yes_i_am_sure'? [Y/N] Y
Running: remove_mod_yes_i_am_sure
sh: can't open '/mod/etc/init.d/S*'
killall: mongoose: no process killed
killall: bootstrapd: no process killed
=== Tue Apr  2 09:06:02 GMT 2013 - modinit - ===========================
=== Tue Apr  2 09:06:02 GMT 2013 - diag ===========================
Filesystem                Size      Used Available Use% Mounted on
/dev/root                17.1M     17.1M         0 100% /
tmpfs                    61.0M     32.0K     61.0M   0% /tmp
tmpfs                    61.0M         0     61.0M   0% /media
/dev/mtdblock1            2.0M    464.0K      1.5M  23% /var/lib/humaxtv
/dev/mtdblock2            2.0M      1.2M    804.0K  61% /var/lib/humaxtv_backup
/dev/sda1              1011.4M     42.0M    918.0M   4% /mnt/hd1
/dev/sda2               447.6G    225.0G    199.8G  53% /mnt/hd2

eth0      Link encap:Ethernet  HWaddr DC:D3:21:56:B2:C1
          inet addr:192.168.1.6  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:552 errors:0 dropped:0 overruns:0 frame:0
          TX packets:215 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:72438 (70.7 KiB)  TX bytes:17744 (17.3 KiB)
          Interrupt:16

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1090 (1.0 KiB)  TX bytes:1090 (1.0 KiB)


  PID USER       VSZ STAT COMMAND
    1 root      1244 S    init
    2 root         0 SW   [migration/0]
    3 root         0 SWN  [ksoftirqd/0]
    4 root         0 SW   [migration/1]
    5 root         0 SWN  [ksoftirqd/1]
    6 root         0 SW<  [events/0]
    7 root         0 SW<  [events/1]
    8 root         0 SW<  [khelper]
    9 root         0 SW<  [kthread]
   10 root         0 SW<  [kblockd/0]
   11 root         0 SW<  [kblockd/1]
   12 root         0 SW<  [khubd]
   13 root         0 SW<  [kseriod]
   14 root         0 SW   [pdflush]
   15 root         0 SW   [pdflush]
   16 root         0 SW<  [kswapd0]
   17 root         0 SW<  [aio/0]
   18 root         0 SW<  [aio/1]
   19 root         0 SW<  [ata/0]
   20 root         0 SW<  [ata/1]
   21 root         0 SW<  [ata_aux]
   22 root         0 SW<  [scsi_eh_0]
   23 root         0 SW<  [scsi_eh_1]
   24 root         0 SW   [mtdblockd]
   25 root         0 SW<  [kpsmoused]
   26 root      1240 S    {rcS} /bin/sh /etc/init.d/rcS
   71 root         0 SWN  [jffs2_gcd_mtd1]
   72 root         0 SWN  [jffs2_gcd_mtd2]
  126 nobody     936 S    /usr/bin/dnsmasq
  132 root       816 S    /sbin/utelnetd -l /bin/tmenu -p 23 -d -B
  145 root      1244 S    {S90settop} /bin/sh /etc/init.d/S90settop start
  155 root      359m S    /usr/bin/humaxtv
  322 root      1248 S    udhcpc -t 5 -T 10 -p /var/lib/humaxtv/udhcpc.eth0.pid
-i eth0
  346 root         0 SW<  [kjournald]
  356 root         0 SW<  [kjournald]
 1029 root      1264 S    {tmenu} /bin/sh /bin/tmenu
 1107 root      1236 S    {diag} /bin/sh /bin/diag remove_mod_yes_i_am_sure
 1112 root      1236 S    /bin/sh
 1122 root      1248 S    {modinit} /bin/sh /sbin/modinit
 1133 root      1236 R    ps -w

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     *               255.255.255.0   U     0      0        0 eth0
default         192.168.1.1     0.0.0.0         UG    0      0        0 eth0

=== Tue Apr  2 09:06:02 GMT 2013 - reset all ===========================
Found reset trigger file at /var/lib/humaxtv/mod/_RESET_CUSTOM_FIRMWARE_ENVIRONM
ENT
Resetting custom firmware environment.
=== Tue Apr  2 09:06:02 GMT 2013 - rma ===========================
=== Tue Apr  2 09:06:02 GMT 2013 - ugprade bootmod ===========================
=== Tue Apr  2 09:06:02 GMT 2013 - setup directories ===========================
mkdir: can't create directory '/mnt/hd2/mod': Read-only file system
mkdir: can't create directory '/mod/': No such file or directory
/bin/sh: cd: line 18: can't cd to /mod

Press return to continue:

      /-------------------------\
      |  T E L N E T   M E N U  |
      \-------------------------/

  [ Humax HDR-Fox T2 (humax) 1.02.29/2.15 ]

  Note: Some areas of the hard disk are not mounted.
        Not all functions will be available.

    1 - Restart into maintenance mode.
    2 - Remove web interface password.
 stat - Show what the box is currently doing.
    x - Exit and close connection.
 diag - Run a diagnostic.
  cli - System command line (advanced users).

Please select option: x


Connection to host lost.
 
That's an old method that won't work properly.
Restart the box into maintenance mode then you should get a menu option for return to manufacturer.
Once you've selected that, restart and check that the front panel says "RMA" then install the official firmware.
 
OK restarted into Maintenance mode ... can't see the option:
Code: 
Menu version 1.05
Enter system PIN: ****

      /---------------------------------------------\
      |  M A I N T E N A N C E   M O D E   M E N U  |
      \---------------------------------------------/

  [ Humax HDR-Fox T2 (humax) 1.02.29/2.15 ]

  Note: Some areas of the hard disk are not mounted.
        Not all functions will be available.

    1 - Check and repair hard disk (fix-disk).
    2 - Clear persistent EPG data.
    x - Leave maintenance mode (Humax will restart).
 diag - Run a diagnostic.
  cli - System command line (advanced users).

Please select option:
 
I just checked (HDR3: 1.02.32/2.15) and get the same.

What did you expect of remove_mod_yes_i_am_sure? It will not remove the Telnet stuff - you have to reinstall the standard firmware over the top to get rid of that. The preparation clears the custom stuff from the hard drive only, so Telnet will work but the web interface should only bring up the web installer page.

From the Telnet prompt try: diag remove_mod_yes_i_am_sure &
See this conversation:
http://hummy.tv/forum/threads/box-i...b-if-will-not-load-any-ideas.3025/#post-36149

Then install standard firmware and you're done.

For reference, did you try a factory reset and disk fix?
 
Incidentally, while in Maintenance Mode my HDR was unresponsive to RC or front panel "off" commands, I had to restart through Telnet. Is that expected?
 
Sjburt said:
OK restarted into Maintenance mode ... can't see the option:
Click to expand...

Apologies, I was thinking of the Reset RMA option which only appears if you're already in RMA mode.
Try running the setrma diagnostic from either mode.
 
#31 wasn't a criticism or a snipe, I was pointing out that Sjburt had already done what you had suggested
In #33 weren't you telling the readers that your suggestion might not apply?
Over to you for the last word as usual . . .
 
You must log in or register to reply here.
Back
Top