Black Hole
May contain traces of nut
WORK IN PROGRESS
QUERY: Is it possible to run System Flush via cfupdater?
QUERY: Some CF packages (including bootsettings!!!) lose their settings, presumably because those settings are stored in Flash. Which packages are they? Could these be backed up to somewhere else, and then restored after – if so, how?
I don't recall actually using System Flush before, but I did recently and the process isn't really documented anywhere (that I have found), so here it is. There might be some optimisations through subsequent discussion, which will get incorporated below.
NB:
What is System Flush for?
Think of System Flush as the equivalent of fixdisk, but for the file system in Flash memory (solid-state storage) rather than the HDD. The Humax firmware uses databases to store everything from user preferences to the tuning, and these are in the flash (the unit still works with no HDD fitted, you just can't record). We believe the Humax firmware responds to inconsistencies detected in the databases by using a brute-force approach: reset everything and make the user go through the setup wizard again.
System Flush also makes you go through the setup wizard (and more), but at a time of your choosing, and with the intention of doing a deeper clean-up than otherwise. The idea is that, particularly if you are having trouble with repeated factory resets, System Flush will minimise the risk of another one. There is an argument for running System Flush any time you get a factory reset, before going through the bother of setting everything up again.
Where to get it
From the Firmware Downloads page on the wiki, under "Supporting Files", the "System Flush Update File". Choose from the correct column for HDR-FOX or HD-FOX.
IMPORTANT: Preparation
Following the System Flush, the unit will restart the same as for Factory Reset, ie with the installation wizard. That means setting up some basic user preferences (if your preferences are not the default), and retuning. The wizard cannot be bypassed, it will be necessary to complete that regardless of some stages being made irrelevant by CF interventions. All settings and the recording schedule will be lost so you will need a note of your menu settings and schedule (CF users can restore the recording schedule from a manual or daily backup), The remote control channel will return to channel 1, so if your handset has been changed to a different channel it will need re-programming.
QUERY: Is it possible to run System Flush via cfupdater?
QUERY: Some CF packages (including bootsettings!!!) lose their settings, presumably because those settings are stored in Flash. Which packages are they? Could these be backed up to somewhere else, and then restored after – if so, how?
I don't recall actually using System Flush before, but I did recently and the process isn't really documented anywhere (that I have found), so here it is. There might be some optimisations through subsequent discussion, which will get incorporated below.
NB:
- System Flush is relevant to non-CF users,
- System Flush is also available for HD-FOX, and I presume usage follows the same lines, but I have not tested it.
What is System Flush for?
Think of System Flush as the equivalent of fixdisk, but for the file system in Flash memory (solid-state storage) rather than the HDD. The Humax firmware uses databases to store everything from user preferences to the tuning, and these are in the flash (the unit still works with no HDD fitted, you just can't record). We believe the Humax firmware responds to inconsistencies detected in the databases by using a brute-force approach: reset everything and make the user go through the setup wizard again.
System Flush also makes you go through the setup wizard (and more), but at a time of your choosing, and with the intention of doing a deeper clean-up than otherwise. The idea is that, particularly if you are having trouble with repeated factory resets, System Flush will minimise the risk of another one. There is an argument for running System Flush any time you get a factory reset, before going through the bother of setting everything up again.
Where to get it
From the Firmware Downloads page on the wiki, under "Supporting Files", the "System Flush Update File". Choose from the correct column for HDR-FOX or HD-FOX.
IMPORTANT: Preparation
Following the System Flush, the unit will restart the same as for Factory Reset, ie with the installation wizard. That means setting up some basic user preferences (if your preferences are not the default), and retuning. The wizard cannot be bypassed, it will be necessary to complete that regardless of some stages being made irrelevant by CF interventions. All settings and the recording schedule will be lost so you will need a note of your menu settings and schedule (CF users can restore the recording schedule from a manual or daily backup), The remote control channel will return to channel 1, so if your handset has been changed to a different channel it will need re-programming.