Temperature running high. Sysmon not Loading.

[Andybrody]

Hi all, been a while since I've been on here.
Over the last couple of days have had the Temp over 50c warning on display.
When into WebIF and found that the HDR had crashed.
Carried out a Fix-Flash-Packages Diagnostic.
Now the Temp problem appears to have been sorted has not shown up and has been on for about 4 hours.
Have just tried to load Temp monitor in Sysmon and all I get is Loading ... Please wait
has been like that for about 30 mins.
Anyone any ideas how to sort this problem.
Cheers Andy

 

[MymsMan]

Occasionaly Sysmon's database becomes corrupted, you can attempt to repair it using the command here
if that doesn't work you can delete the old database rm /mod/monitor/monitor.db

 

[Wallace]

Thank you, MymsMan, I had the same issue and deleting the old database by running that command worked.

 

[Andybrody]

Occasionaly Sysmon's database becomes corrupted, you can attempt to repair it using the command here
if that doesn't work you can delete the old database rm /mod/monitor/monitor.db

Hi MymsMan thanks for the reply,
Do I just copy/paste the command line into Run Diagnostic: general box the run diagnostic.
Thanks again Andy

 

[MymsMan]

Hi MymsMan thanks for the reply,
Do I just copy/paste the command line into Run Diagnostic: general box the run diagnostic.
Thanks again Andy

No these commands need to be run from a command line, there is a Command Line option on the diagnostics page, or you can use Telnet or Putty
If prompted for a PIN try 0000, If given a menu of option enter cli for System command line, then right click to get Paste option

 

[Black Hole]

there is a Command Line option on the diagnostics page

...provided you have package webshell installed.

 

[Andybrody]

rm /mod/monitor/monitor.db

Thank you,
that did the trick
Andy

 

[alanofcleeves]

rm /mod/monitor/monitor.db

...provided you have package webshell installed.

I had the same problem, same fix.
Thanks to both.