[CFW 2.19/1.03.06] Custom firmware for version 1.03.06

af123

af123

Administrator
Staff member
I have released custom firmware version 2.19 for Humax version 1.03.06.

This version can be safely applied directly to any HDR Fox-T2 running Humax firmware version 1.02.20 or above including those which originally came from Humax with 1.03.06 pre-installed. It is also safe to apply this to either of the two HDR Fox-T2 models that are in circulation, the HDR-FOX T2/GB and the HDR-FOX T2/GB/RE.

It's available from the usual download page at http://wiki.hummy.tv/wiki/Firmware_Downloads

If anyone installs this on a /RE model, I'd be interested in whether there is any difference from a standard model in the output of cat /proc/meminfo and cat /proc/cpuinfo.
 
I have come across my first problem trying to install ir
Code: 
>>> opkg install ir
 
Installing ir (1.07) to root...
 
Downloading http://hummypkg.org.uk/hdrfoxt2/base/ir_1.07_mipsel.opk.
 
Humax software version: 1.03.06
 
This package requires CFW 2.11 or above with Humax firmware 1.02.20, .27, .28, .29 or .32.
 
Collected errors:
 
* pkg_run_script: package "ir" preinst script returned status 1.
 
* preinst_configure: Aborting installation of ir.
 
* opkg_install_cmd: Cannot install package ir.
Possibly it just needs the package updating.
 
All seems to be OK so far, apart from portal-xtra1 not working as mentioned HERE. Hopefully this can be made to work with this firmware.
 
Any difference in the contents of those files (compared with an old hardware model)?


Posted on the move; please excuse any brevity.
 
Sorry, yes they're telnet commands. I can stick them into a diagnostic if it's easier.


Posted on the move; please excuse any brevity.
 
Here is the output
Code: 
humax5# cat /proc/meminfo
MemTotal:      124984 kB
MemFree:          3500 kB
Buffers:          7100 kB
Cached:          49580 kB
SwapCached:          0 kB
Active:          82568 kB
Inactive:        28140 kB
HighTotal:          0 kB
HighFree:            0 kB
LowTotal:      124984 kB
LowFree:          3500 kB
SwapTotal:          0 kB
SwapFree:            0 kB
Dirty:              4 kB
Writeback:          0 kB
AnonPages:      54012 kB
Mapped:          23996 kB
Slab:            8836 kB
PageTables:        600 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:    62492 kB
Committed_AS:    86440 kB
VmallocTotal:  262136 kB
VmallocUsed:      588 kB
VmallocChunk:  261524 kB
humax5#
Code: 
humax5# cat /proc/cpuinfo
system type            : BCM97xxx Settop Platform
build target            : unknown
processor              : 0
cpu model              : BMIPS4380 V4.4  FPU V0.1
cpu MHz                : 402.43
BogoMIPS                : 402.43    ( udelay_val : 201216  HZ = 1000 )
wait instruction        : yes
microsecond timers      : yes
tlb_entries            : 32
extra interrupt vector  : yes
hardware watchpoint    : no
ASEs implemented        : mips16
VCED exceptions        : not available
VCEI exceptions        : not available
RAC setting            : Unknown
unaligned access        : 104253
rdhwr/brdhwr traps      : 0 / 0
process migrations      : 1419
processor              : 1
cpu model              : BMIPS4380 V4.4  FPU V0.1
cpu MHz                : 404.48
BogoMIPS                : 404.48    ( udelay_val : 202240  HZ = 1000 )
wait instruction        : yes
microsecond timers      : yes
tlb_entries            : 32
extra interrupt vector  : yes
hardware watchpoint    : no
ASEs implemented        : mips16
VCED exceptions        : not available
VCEI exceptions        : not available
RAC setting            : Unknown
humax5#
 
So is this looking good for the GB boxes or should I wait?
I'm itching to get access to my videos and work remotely over the network.
 
Installed on my old HDR and seems fine so far.
Portal is a hell of a lot quicker and yes, it uses the new iplayer version :)
Nice one af123
 
af123, was there anything of interest in the results of cat /proc/meminfo and cat /proc/cpuinfo that I posted in #10.
 
The only differences I could see between your results and an HDR running 1.02.32 was the following :-
Code: 
meminfo differences
MemFree:          5468 kB
Buffers:        34908 kB
Cached:          37588 kB
Active:          68240 kB
Inactive:        38308 kB
LowFree:          5468 kB
AnonPages:      34032 kB
Mapped:          14108 kB
Slab:            11204 kB
PageTables:        512 kB
Committed_AS:  101268 kB
---------------------------
cpuinfo differences (processor 0)
unaligned access        : 524881
process migrations      : 4307
 
brian said:
af123, was there anything of interest in the results of cat /proc/meminfo and cat /proc/cpuinfo that I posted in #10 ?
Click to expand...
No - seems the hardware is the same, at least in terms of CPU and memory. Might be able to see more when I release CFW 2.20...
 
Great stuff, working well on 'old' unit with iPlayer / portal looking good. I wonder if that means the new browser could handle the other catchup services regardless of whether humax make them available (like the general browser in xtra portal before?)
 
You must log in or register to reply here.
Back
Top