Recent content by madaboutlotus

Hi Re-flashed the software, go rid of the clock symbol (it was indicating a scheduled record series, duh) and still the box stops displaying video out. So tried an earlier suggestion and connected to TV via Scart, presto, TV output holds. So, changed to a spare HDMI cable and we have the box...

Location of the firmware?

Might be worth a try. So long as it does not wipe the HDD.

It has been powered off a few times from the wall socket, same thing, still has the clock symbol coming up.

I am only guessing that there is something wron with the Sleep timer setting on my box. When it is first switched on from standby or power on, the TV screen wil display the picture for about 10s, the clock/timer symbol comes on in the display and the screen goes blank and there is nothing I can...

So 2 cables (same) looks correct then. Thanks for the reply

prpr. It was set on One Cable before. It make sense I suppose, but I could not see why you would want to set up the Two cables (same) unless it is for when you cross link the middle connection to the second input? Perhaps someone could give me a definitive answer on this. Regards

grahamlthompson. Many thanks, I have done the setup and changed it to two cable (same) as I assume this is for a single LNB with a dual cable coming from it. The other setting is two cable different which I have taken as 2 LNB's. Regards

Yes I am using two cables and they are in the outer sockets, so I don't see the problem. If I do a factory reset will I lose my recorded programs on the HDD?

If I try and record two programmes that overlap I get a Recording Conflict message? I have both tuners wired to the dish so why does this not work? I have two boxes and it's the same on both so must be a common issue. Probably a simple answer.

Hey, thanks very much for the speedy reply. I'll give that a go tonight.

I have recently taken one Sat connection and put into another satellite box. The problem I have is that I cannot seem to record any HD programmes from the guide but non-HD programmes will. Is this because HD programmes need 2 feeds connected?

raydon Apologies for being such a twonk !:oops:. Reading underway! Next question will be constructive born out of some knowledge.

Hi raydon Firstly thanks for the Web Interface it look very neat. However as a novice I am struggling to get to grips with a few things 1. When I look at the media file from the listing, when I click on a video all I get is a dialog box telling me what the programme is all about. 2. The Service...