A few months ago, I recorded a movie from a French language channel on 19.2. I played some of it on the HDR at the time, and the default audio was (dubbed) french, but there was also the original english soundtrack.
I just went to play it again on the HDR, and it now only plays the english...
That is a nice suggestion, but it doesn't work. The HDR does not (in my experience) display any now and next data for non- 28.2 channels in non-freesat mode or pseudo-freesat mode.
I use my HDR with DISECQ switches and LNBs for 28.2 and 19.2.
I don't think that I have ever seen any guide information (or now and next info) for any channel on 19.2. I think that this is just the way the software is designed.
I have also noticed that without a 28.2 feed, the real-time...
I presume that you have tried a reset to factory defaults?
Have you checked each LNB feed cable individually to ensure that they both have signal?
Do you have a signal on the Freesat EPG transponder 11428 H?
I think that you are trying to add channels that only exist on Astra 1 satellites at 19.2 degrees E. Do you have a dish or LNB pointing at that satellite group (all Freesat transmissions are from 28.2E).
I checked some of the channels you list on http://en.kingofsat.net before reaching that...
There isn't one. (at least not provided by Humax)
You need to install the custom firmware bundle, see: here. then everything (including enabling of FTP) is done through the web interface or telnet.
Current evidence would suggest not... at least for non-Freesat transponders.
Does anyone know if the transponder lists are stored in a file so that they can be backed up and distributed?
You might also try:
10773 H 22000 3/4 S2 (Anixe HD)
11361 H 22000 2/3 S2 (Arte HD)
11612 H 22000 5/6 S (Astra 3D demo)
I wonder if there are also missing transponders on 28.2?
BTW, I am sure it will help someone to say that to add a transponder definition, you go the the manual tune page...
I have now tried a few different dish/lnb combinations, and currently have 2 identical feeds with 28.2 on disecq A and 19.2 on disecq B.
It does work just as well (incliuding Freesat dissection if 19.2 is on disecq A, it detects the switch and does the automatic Freesat tune on disecq B.
On...
I tried that, but when you select the transponder, the strength and quality bars drop to 0, and a scan fails to find any channels.
On the Strong, the strength and quality of that transponder are 75 and 89, which should be at least enough for the Humax to see something.
Annoyingly transponder...
My antenna configuration is twin LNB on 28.2, one feed direct to tuner 2, the other through a disecq switch (port B) to tuner 1, with a single LNB on 19.2 into port A of the disecq switch.
Manual tuning has been done, all freesat channels seem to be there, and most 19.2 channels. With Diablo2...
A few months ago, I recorded a movie from a French language channel on 19.2. I played some of it on the HDR at the time, and the default audio was (dubbed) french, but there was also the original english soundtrack.
I just went to play it again on the HDR, and it now only plays the english...
That is a nice suggestion, but it doesn't work. The HDR does not (in my experience) display any now and next data for non- 28.2 channels in non-freesat mode or pseudo-freesat mode.
I use my HDR with DISECQ switches and LNBs for 28.2 and 19.2.
I don't think that I have ever seen any guide information (or now and next info) for any channel on 19.2. I think that this is just the way the software is designed.
I have also noticed that without a 28.2 feed, the real-time...
I presume that you have tried a reset to factory defaults?
Have you checked each LNB feed cable individually to ensure that they both have signal?
Do you have a signal on the Freesat EPG transponder 11428 H?
I think that you are trying to add channels that only exist on Astra 1 satellites at 19.2 degrees E. Do you have a dish or LNB pointing at that satellite group (all Freesat transmissions are from 28.2E).
I checked some of the channels you list on http://en.kingofsat.net before reaching that...
There isn't one. (at least not provided by Humax)
You need to install the custom firmware bundle, see: here. then everything (including enabling of FTP) is done through the web interface or telnet.
Current evidence would suggest not... at least for non-Freesat transponders.
Does anyone know if the transponder lists are stored in a file so that they can be backed up and distributed?
You might also try:
10773 H 22000 3/4 S2 (Anixe HD)
11361 H 22000 2/3 S2 (Arte HD)
11612 H 22000 5/6 S (Astra 3D demo)
I wonder if there are also missing transponders on 28.2?
BTW, I am sure it will help someone to say that to add a transponder definition, you go the the manual tune page...
I have now tried a few different dish/lnb combinations, and currently have 2 identical feeds with 28.2 on disecq A and 19.2 on disecq B.
It does work just as well (incliuding Freesat dissection if 19.2 is on disecq A, it detects the switch and does the automatic Freesat tune on disecq B.
On...
I tried that, but when you select the transponder, the strength and quality bars drop to 0, and a scan fails to find any channels.
On the Strong, the strength and quality of that transponder are 75 and 89, which should be at least enough for the Humax to see something.
Annoyingly transponder...
My antenna configuration is twin LNB on 28.2, one feed direct to tuner 2, the other through a disecq switch (port B) to tuner 1, with a single LNB on 19.2 into port A of the disecq switch.
Manual tuning has been done, all freesat channels seem to be there, and most 19.2 channels. With Diablo2...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.