The IC may well be stuck to the pcb during manufacture. The best way to remove it is one leg at a time. Use de-solder braid to remove the majority of the solder then heat the individual pins with a fine tip and use a pair of fine tweezers to bend the heated leg upwards when it is free.
Personally I would like to see it as a permanent fixture. This year there was less than 2 weeks (during peak holiday season) between requesting donations and the target being reached. If the same thing happens next year many who would have liked to donate will be denied the opportunity. There...
Downloaded custom firmware, fan and HDD temperature both ok. Interestingly the fault has not reoccurred since downloading the firmware although it was rebooting about twice most evenings. I did have to set up the WiFi again as the settings appear to have become corrupted so perhaps that had some...
I think I am but to be honest not sure. From the home page - select package management - select available (from installed/available/upgrades) then use install button on the right hand side of the package description. The result every time is as I posted above.
I've just loaded the custom software but am having problems trying to install the additional packages.
Whatever I try to install I get a similar error message as below
>>> opkg install sysmon
wget: bad address 'hpkg.tv'
Installing sysmon (1.2.2) to root...
Downloading...
Thanks for your helpful information. Any ideas why it should be intermittently rebooting? I've disconnected the network and done a full reset although I haven't reformatted the hard drive yet.
My cooling fan has stopped working. Does anyone know where the 12V fan supply is derived from? I've checked and the supply is absent. With the current hot weather the unit intermittently reboots although it seems fine on cooler days.
Martin, after the switchover I have only got a restricted 3 day EPG on some channels while others still show the full 7 days. I have a Sony and a Toshiba tv which both use the same aerial but have 7 day EPG information on all channels.
Running software ver 1.00.23.
Retuned by doing complete system reset. I never turn the Humax off so plenty of time to populate the EPG.
No duplicated channels, I live in the shadow of a hill to the north so the only transmitter I can receive is Rowridge on the IOW.
Problem channel 27 -...
We had the digital switchover last month and since then on CH4 and most of the minor channels we only have 3 days on the EPG instead of the full 7 days on our Humax box. Our two DTV's are OK.
The IC may well be stuck to the pcb during manufacture. The best way to remove it is one leg at a time. Use de-solder braid to remove the majority of the solder then heat the individual pins with a fine tip and use a pair of fine tweezers to bend the heated leg upwards when it is free.
Personally I would like to see it as a permanent fixture. This year there was less than 2 weeks (during peak holiday season) between requesting donations and the target being reached. If the same thing happens next year many who would have liked to donate will be denied the opportunity. There...
Downloaded custom firmware, fan and HDD temperature both ok. Interestingly the fault has not reoccurred since downloading the firmware although it was rebooting about twice most evenings. I did have to set up the WiFi again as the settings appear to have become corrupted so perhaps that had some...
I think I am but to be honest not sure. From the home page - select package management - select available (from installed/available/upgrades) then use install button on the right hand side of the package description. The result every time is as I posted above.
I've just loaded the custom software but am having problems trying to install the additional packages.
Whatever I try to install I get a similar error message as below
>>> opkg install sysmon
wget: bad address 'hpkg.tv'
Installing sysmon (1.2.2) to root...
Downloading...
Thanks for your helpful information. Any ideas why it should be intermittently rebooting? I've disconnected the network and done a full reset although I haven't reformatted the hard drive yet.
My cooling fan has stopped working. Does anyone know where the 12V fan supply is derived from? I've checked and the supply is absent. With the current hot weather the unit intermittently reboots although it seems fine on cooler days.
Martin, after the switchover I have only got a restricted 3 day EPG on some channels while others still show the full 7 days. I have a Sony and a Toshiba tv which both use the same aerial but have 7 day EPG information on all channels.
Running software ver 1.00.23.
Retuned by doing complete system reset. I never turn the Humax off so plenty of time to populate the EPG.
No duplicated channels, I live in the shadow of a hill to the north so the only transmitter I can receive is Rowridge on the IOW.
Problem channel 27 -...
We had the digital switchover last month and since then on CH4 and most of the minor channels we only have 3 days on the EPG instead of the full 7 days on our Humax box. Our two DTV's are OK.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.