Yeah I know about that but I was wondering if it could be added to the same screen so that you only have to move up/down so it saves moving across every time you move up/down.
Thanks
Sent from my iPhone using Tapatalk
Go, does anyone know if it's possible to add what's on next to the info bar at bottom of screen when scrolling through?
Thanks
Sent from my iPhone using Tapatalk
See my earlier post, this is how my problem started. Turned out it was a corrupt front panel and I had to replace it to fix the problem
Sent from my iPhone using Tapatalk
Some will already know this but I have owned a T2 for years and never knew it so I hope this will help others.
You can switch between 2 channels quickly, the one you are watching and the last one you were watching (like on sky tv).
Simply press the "i" button to get the channel into bar on...
It gets on my t*ts that the order of recordings isn't sorted by newest first, the folders are always at the top. I don't mind folders but if they could be ordered so that newest recordings were top it would be so much better, especially when you record a 1 off episode of something and you have...
You could go into settings>prefs>recording and change end padding time to 1 minute to add an extra minute of recording to your records but this can cause issues with overlapping recordings (say if you have one ending at 8:01 pm with paddling and 2 recording starting at 8:00pm, there would be a...
Ok I think I have sorted my issue, in the dlna filter setting in webif in custom FW I was putting the wrong ip (192.168.1.13, should have been. 0.13). I have restarted both of my T2s, mycloud and my Philips Hue set and I have not had any reboots on the t2 yet. What a gimp eh.
Sent from my...
I have been told that the WD MyCloud device is causing my T2 to crash and it seems to be true because it doesn't crash if I disconnect from the MyCloud from the network.
It is known that twonky running on the network is causing it and I need to downgrade to a lover version of twin my but I...
I followed step 2C part 1 and when I went to turn on content share after resetting DLNA database the T2 crashed as I turned it on, I rebooted the device (using the power button on remote) and 20 seconds later it crashed again.
Sent from my iPhone using Tapatalk
You could try installing the custom FW via a USB stick in case there is a corrupt file somewhere, unless when you say back to factory settings you mean you did it by downloading the humax FW and reinstalling it as a new install.
Sent from my iPhone using Tapatalk
Black hole, you are awesome. Thank you. I will look at this later as I'm about to start painting and I have a lot to do.
Thank you.
Sent from my iPhone using Tapatalk
Further update: both seem to find each other now but after a restart of the T2 (from standby) when I go to media>storage>network then select the other T2 it causes the T2 to crash (it says on display CRASH REBOOT IN....) only the one I'm using crashes because I can still hear the sound from the...
Both are on manual, both have the mycloud ip in the dlna filter in webif, 1 of the t2 can see the other but not the other way around.
Sent from my iPhone using Tapatalk
I did put ip in both filter settings on webif. I have come to bed now so I will see in the morning if it's working.
Thank you for your help
Sent from my iPhone using Tapatalk
Update: the T2 upstairs is finding the T2 from downstairs in media>storage>network but the downstairs one doesn't see the upstairs one, could this be because there is a lot more stuff on the upstairs one and it will take a lot longer so show?
Thanks to everyone for your help, you are all...
So it's the ip of the mycloud that I need to put into the filter setting or the ip of the other t2? I have tried both and the mycloud still shows in media>storage>network no matter which ip I take out of put in.
Sent from my iPhone using Tapatalk
So it's the ip of the mycloud that I need to put into the filter setting or the ip of the other t2? I have tried both and the mycloud still shows in media>storage>network no matter which ip I take out of put in.
Sent from my iPhone using Tapatalk
This is what is shows for the other t2 (upstairs) via webif.
I don't know what the problem is?
Do I need to install some other package on the t2? I did install the dnld filter because of a twonky issue with the mycloud drive.
Sent from my iPhone using Tapatalk
Yeah I know about that but I was wondering if it could be added to the same screen so that you only have to move up/down so it saves moving across every time you move up/down.
Thanks
Sent from my iPhone using Tapatalk
Go, does anyone know if it's possible to add what's on next to the info bar at bottom of screen when scrolling through?
Thanks
Sent from my iPhone using Tapatalk
See my earlier post, this is how my problem started. Turned out it was a corrupt front panel and I had to replace it to fix the problem
Sent from my iPhone using Tapatalk
Some will already know this but I have owned a T2 for years and never knew it so I hope this will help others.
You can switch between 2 channels quickly, the one you are watching and the last one you were watching (like on sky tv).
Simply press the "i" button to get the channel into bar on...
It gets on my t*ts that the order of recordings isn't sorted by newest first, the folders are always at the top. I don't mind folders but if they could be ordered so that newest recordings were top it would be so much better, especially when you record a 1 off episode of something and you have...
You could go into settings>prefs>recording and change end padding time to 1 minute to add an extra minute of recording to your records but this can cause issues with overlapping recordings (say if you have one ending at 8:01 pm with paddling and 2 recording starting at 8:00pm, there would be a...
Ok I think I have sorted my issue, in the dlna filter setting in webif in custom FW I was putting the wrong ip (192.168.1.13, should have been. 0.13). I have restarted both of my T2s, mycloud and my Philips Hue set and I have not had any reboots on the t2 yet. What a gimp eh.
Sent from my...
I have been told that the WD MyCloud device is causing my T2 to crash and it seems to be true because it doesn't crash if I disconnect from the MyCloud from the network.
It is known that twonky running on the network is causing it and I need to downgrade to a lover version of twin my but I...
I followed step 2C part 1 and when I went to turn on content share after resetting DLNA database the T2 crashed as I turned it on, I rebooted the device (using the power button on remote) and 20 seconds later it crashed again.
Sent from my iPhone using Tapatalk
You could try installing the custom FW via a USB stick in case there is a corrupt file somewhere, unless when you say back to factory settings you mean you did it by downloading the humax FW and reinstalling it as a new install.
Sent from my iPhone using Tapatalk
Black hole, you are awesome. Thank you. I will look at this later as I'm about to start painting and I have a lot to do.
Thank you.
Sent from my iPhone using Tapatalk
Further update: both seem to find each other now but after a restart of the T2 (from standby) when I go to media>storage>network then select the other T2 it causes the T2 to crash (it says on display CRASH REBOOT IN....) only the one I'm using crashes because I can still hear the sound from the...
Both are on manual, both have the mycloud ip in the dlna filter in webif, 1 of the t2 can see the other but not the other way around.
Sent from my iPhone using Tapatalk
I did put ip in both filter settings on webif. I have come to bed now so I will see in the morning if it's working.
Thank you for your help
Sent from my iPhone using Tapatalk
Update: the T2 upstairs is finding the T2 from downstairs in media>storage>network but the downstairs one doesn't see the upstairs one, could this be because there is a lot more stuff on the upstairs one and it will take a lot longer so show?
Thanks to everyone for your help, you are all...
So it's the ip of the mycloud that I need to put into the filter setting or the ip of the other t2? I have tried both and the mycloud still shows in media>storage>network no matter which ip I take out of put in.
Sent from my iPhone using Tapatalk
So it's the ip of the mycloud that I need to put into the filter setting or the ip of the other t2? I have tried both and the mycloud still shows in media>storage>network no matter which ip I take out of put in.
Sent from my iPhone using Tapatalk
This is what is shows for the other t2 (upstairs) via webif.
I don't know what the problem is?
Do I need to install some other package on the t2? I did install the dnld filter because of a twonky issue with the mycloud drive.
Sent from my iPhone using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.