• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

1.02.29 Freezes HD-FOX

Black Hole

Black Hole

May contain traces of nut
Having yesterday updated my HD-FOX from 1.02.27+2.11 to 1.02.29+2.12, it appears I can make it freeze up at will by Menu >> Settings >> System >> Internet Setting. The only way out is a cold start (I left it to see what would happen on one occasion, and eventually the box went into standby).

Immediately after installation (when requiring reboots for the installation process, I was seeing failed boots like I have done before - it starts to boot at power up but then drops back to a red LED, and does the same over and over again unless I press the power button again immediately the LED turns red. I used to see this with an earlier firmware, but it never happened with 1.02.27.

This problem has not recurred in normal use, previously it was mainly OK in normal use but struck when turning off and then on again soon afterwards, and I strongly suspect the same will be true here.

I am also finding the virtual remote (ir package) won't work.

I will persist for a few days but it looks like I will return to .27, and as I can't see a route to 1.02.27+2.12 will have to make do with 2.11.
 
Some more interesting: Internet Setting freeze deliberately initiated, I turned off the Qumi (so there was no HDMI handshaking) because I was going to leave it and confirm the drop into standby observation. Killing the HDMI caused the HD-FOX to drop into standby immediately, after which I was able to reboot it.

Note that I frequently kill the HDMI under normal circumstances to have an audio feed only, and this does not cause a reboot or drop to standby (normally).
 
No, the only difference is I didn't have any custom firmware installed before upgrading to 1.02.29. Could that be significant?
 
Doesn't seem likely, but anything is possible. 1.02.29 didn't bode well for me before I added the CF, and yet 1.02.27 was absolutely fine. Dunno why I bothered really.
 
Can access Internet Settings & step through all the pages, of course not tried to change settings, cannot see any problems.
1.02.29 & 2.12 HDR Fox T2 500g
 
Latest: I recreated the freeze by going to Internet Setting and tried to select Configure LAN and then left it for a few minutes, but this time instead of rebooting it eventually did access the Configure LAN menu - and then froze again, finally responding to a blind "Menu" press not by exiting the menus but by going to the main menu again.
 
You must log in or register to reply here.
Back
Top