Minari
New Member
Hi everybody,
For about a month now I’ve been having problems recording BBC2 and BBC4 simultaneously. BBC2 records ok but during the recording, if I change channels to BBC4 I get a “weak or no signal message” on screen. There’s no way to check the strength while recording because it’s greyed out, but once the recording stops, the BBC4 signal comes back. The BBC4 programme is not recorded.
I’m in Belfast within 5 miles of the transmitter, and signal strength/quality is 80-90/100%. Channel 60, which carries BBC4, is the lowest, at 60%/100%. It’s not a signal strength problem.
I seem to remember that there was a similar problem years ago but Humax issued a fix for it. I contacted Humax support but their suggestion was to run a factory reset, which has no effect.
I installed custom firmware and a new hard disc about 3 years ago to solve the constant delete problem and since then I’ve had no problems, until now. From looking through the forum I seem to be the only one with this one.
Any thoughts?
Thanks in advance
Glenn
For about a month now I’ve been having problems recording BBC2 and BBC4 simultaneously. BBC2 records ok but during the recording, if I change channels to BBC4 I get a “weak or no signal message” on screen. There’s no way to check the strength while recording because it’s greyed out, but once the recording stops, the BBC4 signal comes back. The BBC4 programme is not recorded.
I’m in Belfast within 5 miles of the transmitter, and signal strength/quality is 80-90/100%. Channel 60, which carries BBC4, is the lowest, at 60%/100%. It’s not a signal strength problem.
I seem to remember that there was a similar problem years ago but Humax issued a fix for it. I contacted Humax support but their suggestion was to run a factory reset, which has no effect.
I installed custom firmware and a new hard disc about 3 years ago to solve the constant delete problem and since then I’ve had no problems, until now. From looking through the forum I seem to be the only one with this one.
Any thoughts?
Thanks in advance
Glenn

). Of course the difficulty Minari is having with BBC4HD should apply to all other services on COM8 including those that are StdDef. If/when COM7/8 vanish a lot of people are going to have wideband aerials which, in theory, they don't need. Still, nothing wrong with getting a new aerial and cable expertly fitted.