Custom firmware install results in reboot about every half minute

[Dave Ell]

Hi

I have just moved to the Sandy Hook transmitter region and, with 1.02.32 custom firmware installed, my HDR Fox-T2 enters a continual reboot cycle shortly after completion.
After installing the standard firmware, I did a successful manual search of all the Sandy Hook channels and this completed perfectly with no subsequent problems.
However, when I install the custom firmware, it behaves as described above.
When it was in London, I had no such problem
I have run a hard drive test but have no idea what to try next.

I’d be grateful for any help.
Thanks
Dave

 

[kevindickinson]

I had a similar problem described at this thread:

http://hummy.tv/forum/threads/retune-now-constant-reboot.4250/#post-52304

Mine was due to a bug in auto schedule restore package which has since been fixed but might be worth a try in case you have discovered another bug.

 

[af123]

Do you have anything in the recording schedule? There was a bug with the first version of the auto restore package that could cause this. You could try a package update from maintenance mode if you can get into it, just type:

opkg update
opkg upgrade

Or make sure you put something into the schedule before installing the custom firmware.

 

[Dave Ell]

I didn't have anything scheduled, but I now have and that has fixed the problem.

Thank you both for your help