Does this hard drive look damaged to you?

zekepliskin

Member
Code:
[LIST=1]
[*]Are you sure you wish to run the hard disk checker (-d -l -y)? [Y/N] Y
[*]Running /bin/fix-disk
[*]PART: [3 1 2]
[*]FSCKOPTS: []
[*] 
[*]Checking disk sda (512 byte sectors)
[*] 
[*]Unmounted /dev/sda1
[*]Unmounted /dev/sda2
[*]Unmounted /dev/sda3
[*] 
[*] 
[*]Running long disk self test
[*]Error at LBA 2551474435
[*] 
[*]/dev/sda:
[*]re-writing sector 2551474435: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2551474436
[*] 
[*]/dev/sda:
[*]re-writing sector 2551474436: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2551474437
[*] 
[*]/dev/sda:
[*]re-writing sector 2551474437: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2551474438
[*] 
[*]/dev/sda:
[*]re-writing sector 2551474438: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2551475878
[*] 
[*]/dev/sda:
[*]re-writing sector 2551475878: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2551475879
[*] 
[*]/dev/sda:
[*]re-writing sector 2551475879: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2579431649
[*] 
[*]/dev/sda:
[*]re-writing sector 2579431649: succeeded
[*] 
[*]Running select disk self test
[*]Error at LBA 2579431650
[*] 
[*]/dev/sda:
[*]re-writing sector 2579431650: succeeded
[*] 
[*]Running select disk self test
[*] 
[*]Checking partition tables...
[*] 
[*]MBR Status: hybrid
[*]GPT Status: present
[*] 
[*]Using superblock 0 on sda1
[*]Using superblock 0 on sda2
[*]Using superblock 0 on sda3
[*]Dev: /dev/sda LBA: 2551474435
[*]LBA: 2551474435 is on partition /dev/sda2, start: 2099200, bad sector offset: 2549375235
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2551474435 maps to file system block 318671904 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 318671904 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1244802
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1244802 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190918_1901.tsDev: /dev/sda LBA: 2551474436
[*]LBA: 2551474436 is on partition /dev/sda2, start: 2099200, bad sector offset: 2549375236
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2551474436 maps to file system block 318671904 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 318671904 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1244802
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1244802 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190918_1901.tsDev: /dev/sda LBA: 2551474437
[*]LBA: 2551474437 is on partition /dev/sda2, start: 2099200, bad sector offset: 2549375237
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2551474437 maps to file system block 318671904 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 318671904 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1244802
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1244802 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190918_1901.tsDev: /dev/sda LBA: 2551474438
[*]LBA: 2551474438 is on partition /dev/sda2, start: 2099200, bad sector offset: 2549375238
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2551474438 maps to file system block 318671904 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 318671904 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1244802
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1244802 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190918_1901.tsDev: /dev/sda LBA: 2551475878
[*]LBA: 2551475878 is on partition /dev/sda2, start: 2099200, bad sector offset: 2549376678
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2551475878 maps to file system block 318672084 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 318672084 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1244802
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1244802 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190918_1901.tsDev: /dev/sda LBA: 2551475879
[*]LBA: 2551475879 is on partition /dev/sda2, start: 2099200, bad sector offset: 2549376679
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2551475879 maps to file system block 318672084 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 318672084 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1244802
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1244802 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190918_1901.tsDev: /dev/sda LBA: 2579431649
[*]LBA: 2579431649 is on partition /dev/sda2, start: 2099200, bad sector offset: 2577332449
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2579431649 maps to file system block 322166556 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 322166556 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1241224
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1241224 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190625_0800.nts
[*]Dev: /dev/sda LBA: 2579431650
[*]LBA: 2579431650 is on partition /dev/sda2, start: 2099200, bad sector offset: 2577332450
[*]dumpe2fs 1.42.13 (17-May-2015)
[*]Using superblock 0
[*]Block size: 4096
[*]LBA 2579431650 maps to file system block 322166556 on /dev/sda2
[*] 
[*]Checking to see if this block is in use...
[*]debugfs 1.42.13 (17-May-2015)
[*]Block 322166556 is marked as in use
[*] 
[*]Searching for inode...
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode: 1241224
[*] 
[*]The following file contains a corrupt block and can not be fully recovered.
[*]You may wish to delete it or recover from backup.
[*] 
[*]debugfs 1.42.13 (17-May-2015)
[*]Inode   Pathname
[*]1241224 /mnt/hd2/My Video/Outback Opal Hunters/Outback Opal Hunters_20190625_0800.nts
[*] 
[*] 
[*]Sun Jan  3 17:12:26 GMT 1971: Checking partition /dev/sda3...
[*]e2fsck 1.42.13 (17-May-2015)
[*]Pass 1: Checking inodes, blocks, and sizes
[*]☻Pass 1: Memory used: 240k/0k (157k/84k), time:  6.45/ 2.04/ 2.48
[*]Pass 1: I/O read: 163MB, write: 0MB, rate: 25.28MB/s
[*]Pass 2: Checking directory structure
[*]Pass 2: Memory used: 340k/0k (259k/82k), time:  0.02/ 0.00/ 0.01
[*]Pass 2: I/O read: 1MB, write: 0MB, rate: 55.86MB/s
[*]Pass 3: Checking directory connectivity
[*]Peak memory: Memory used: 340k/0k (259k/82k), time:  7.21/ 2.31/ 2.55
[*]Pass 3A: Memory used: 340k/0k (259k/82k), time:  0.00/ 0.00/ 0.00
[*]Pass 3A: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 3: Memory used: 340k/0k (259k/82k), time:  0.00/ 0.00/ 0.00
[*]Pass 3: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 4: Checking reference counts
[*]☻Pass 4: Memory used: 340k/0k (53k/288k), time:  1.19/ 1.18/ 0.00
[*]Pass 4: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 5: Checking group summary information
[*]☻Pass 5: Memory used: 340k/0k (53k/288k), time:  3.31/ 2.53/ 0.03
[*]Pass 5: I/O read: 1MB, write: 0MB, rate: 0.30MB/s
[*] 
[*]          13 inodes used (0.00%, out of 655360)
[*]           0 non-contiguous files (0.0%)
[*]           0 non-contiguous directories (0.0%)
[*]             # of inodes with ind/dind/tind blocks: 1/1/0
[*]      112498 blocks used (4.29%, out of 2621273)
[*]           0 bad blocks
[*]           1 large file
[*] 
[*]           2 regular files
[*]           2 directories
[*]           0 character device files
[*]           0 block device files
[*]           0 fifos
[*]           0 links
[*]           0 symbolic links (0 fast symbolic links)
[*]           0 sockets
[*]------------
[*]           4 files
[*]Memory used: 340k/0k (53k/288k), time: 11.74/ 6.03/ 2.58
[*]I/O read: 165MB, write: 1MB, rate: 14.05MB/s
[*]Sun Jan  3 17:12:38 GMT 1971
[*] 
[*]Sun Jan  3 17:12:38 GMT 1971: Checking partition /dev/sda1...
[*]e2fsck 1.42.13 (17-May-2015)
[*]Pass 1: Checking inodes, blocks, and sizes
[*]☻Pass 1: Memory used: 140k/0k (62k/79k), time:  0.53/ 0.21/ 0.12
[*]Pass 1: I/O read: 17MB, write: 0MB, rate: 32.00MB/s
[*]Pass 2: Checking directory structure
[*]Pass 2: Memory used: 140k/0k (72k/69k), time:  0.01/ 0.00/ 0.00
[*]Pass 2: I/O read: 1MB, write: 0MB, rate: 86.46MB/s
[*]Pass 3: Checking directory connectivity
[*]Peak memory: Memory used: 140k/0k (72k/69k), time:  0.64/ 0.24/ 0.13
[*]Pass 3A: Memory used: 140k/0k (72k/69k), time:  0.00/ 0.00/ 0.00
[*]Pass 3A: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 3: Memory used: 140k/0k (71k/70k), time:  0.00/ 0.00/ 0.00
[*]Pass 3: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 4: Checking reference counts
[*]☻Pass 4: Memory used: 140k/0k (50k/91k), time:  0.10/ 0.10/ 0.00
[*]Pass 4: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 5: Checking group summary information
[*]☻Pass 5: Memory used: 140k/0k (50k/91k), time:  0.37/ 0.36/ 0.00
[*]Pass 5: I/O read: 1MB, write: 0MB, rate: 2.67MB/s
[*] 
[*]          16 inodes used (0.02%, out of 65536)
[*]           0 non-contiguous files (0.0%)
[*]           0 non-contiguous directories (0.0%)
[*]             # of inodes with ind/dind/tind blocks: 3/2/0
[*]       17096 blocks used (6.52%, out of 262144)
[*]           0 bad blocks
[*]           1 large file
[*] 
[*]           4 regular files
[*]           3 directories
[*]           0 character device files
[*]           0 block device files
[*]           0 fifos
[*]           0 links
[*]           0 symbolic links (0 fast symbolic links)
[*]           0 sockets
[*]------------
[*]           7 files
[*]Memory used: 140k/0k (50k/91k), time:  1.13/ 0.70/ 0.14
[*]I/O read: 17MB, write: 1MB, rate: 15.08MB/s
[*]Sun Jan  3 17:12:39 GMT 1971
[*] 
[*]Creating swap file...
[*]Setting up swapspace version 1, size = 1073737728 bytes
[*]UUID=a44165e0-9f91-493a-b650-f91eee722e70
[*] 
[*]Sun Jan  3 17:13:04 GMT 1971: Checking partition /dev/sda2...
[*]e2fsck 1.42.13 (17-May-2015)
[*]Pass 1: Checking inodes, blocks, and sizes
[*]☻Pass 1: Memory used: 1360k/352k (868k/493k), time: 3426.73/1993.89/31.25
[*]Pass 1: I/O read: 1033MB, write: 0MB, rate: 0.30MB/s
[*]Pass 2: Checking directory structure
[*]☻Pass 2: Memory used: 1360k/352k (1078k/283k), time:  2.80/ 0.54/ 0.09
[*]Pass 2: I/O read: 5MB, write: 0MB, rate: 1.79MB/s
[*]Pass 3: Checking directory connectivity
[*]Peak memory: Memory used: 1360k/352k (1078k/283k), time: 3433.09/1997.49/31.41
[*]Pass 3A: Memory used: 1360k/352k (1089k/272k), time:  0.00/ 0.00/ 0.00
[*]Pass 3A: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 3: Memory used: 1360k/352k (1074k/287k), time:  0.04/ 0.04/ 0.00
[*]Pass 3: I/O read: 1MB, write: 0MB, rate: 26.78MB/s
[*]Pass 4: Checking reference counts
[*]☻Pass 4: Memory used: 1360k/352k (582k/779k), time:  2.62/ 2.55/ 0.07
[*]Pass 4: I/O read: 0MB, write: 0MB, rate: 0.00MB/s
[*]Pass 5: Checking group summary information
[*]☻Pass 5: Memory used: 1360k/352k (571k/790k), time: 116.81/16.18/ 3.99
[*]Pass 5: I/O read: 87MB, write: 0MB, rate: 0.74MB/s
[*] 
[*]        8186 inodes used (0.58%, out of 1419648)
[*]         385 non-contiguous files (4.7%)
[*]          15 non-contiguous directories (0.2%)
[*]             # of inodes with ind/dind/tind blocks: 633/371/43
[*]   178235373 blocks used (49.05%, out of 363400537)
[*]           0 bad blocks
[*]         133 large files
[*] 
[*]        6506 regular files
[*]         329 directories
[*]           0 character device files
[*]           0 block device files
[*]           0 fifos
[*]           2 links
[*]        1342 symbolic links (1339 fast symbolic links)
[*]           0 sockets
[*]------------
[*]        8179 files
[*]Memory used: 1360k/352k (571k/790k), time: 3552.64/2016.27/35.49
[*]I/O read: 1125MB, write: 1MB, rate: 0.32MB/s
[*]Sun Jan  3 18:12:17 GMT 1971
[*]Removing extra swap space.
[*] 
[*]Finished
[*]fix-disk: session terminated with exit status 0
[/LIST]

This is an old 1.5TB Samsung drive I fitted to my parents box, but they've had trouble with it. Based on the pending sectors etc, and looking at the fixdisk report, is it okay to continue using now it's been checked/repaired or would it be better to swap it out?

Thanks in advance.
 
Last edited:
It seems to be fixed now but the Webif Disk Diagnostics, or equivalently the output of smartctl -A, would help enable a prognosis.
 
Code:
  1 Raw_Read_Error_Rate     0x000f   098   001   051    Pre-fail  Always   In_the_past 22840
  3 Spin_Up_Time            0x0007   072   072   011    Pre-fail  Always       -       9290
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5114
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   100   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   100   100   015    Pre-fail  Offline      -       12581
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       9101
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       1
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4064
 13 Read_Soft_Error_Rate    0x000e   099   011   000    Old_age   Always       -       17535
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   099   099   000    Pre-fail  Always       -       1
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       42341
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   038   000    Old_age   Always       -       41 (Min/Max 30/41)
194 Temperature_Celsius     0x0022   054   038   000    Old_age   Always       -       46 (Min/Max 30/47 #537)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       84254910
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       767
200 Multi_Zone_Error_Rate   0x000a   100   099   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   088   086   000    Old_age   Always       -       725
 
I'm not clear why you hosted that text file externally instead of pasting it into a code tag (post 1) - would have been much easier for us!
 
You still have one pending sector, so another fix-disk run is indicated.

If this is a machine that you only access occasionally, use the sysmon package and just check the Hard Disk history graph (Webif>System Monitor>Hard Disk) to see if disk errors are proliferating.
 
Back
Top