• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

faulty remote control?

0

0o00o0

New Member
Just got the fvp-4000t and the rm-l08 but the short travel buttons around the ok button seem to be Intermittent. about 20% of the time the led around the power button doesn't light up so I guess no ir is sent. the other soft buttons seem fine. is this a common issue? I quite like the remote apart from this issue so hopefully resolvable.

thanks for thoughts

Sent from my SM-G935F using Tapatalk
 
I've no doubt OoOOoO has sorted his problem one way or another, however for anyone else who has stumbled here with the RM-L03 remote which I seem to have...

The RM-L03 is similar RM-F04 with a slight exception. The top of the remote, as you can probably guess, comes in 2 sections, the black section and the silver section. The silver section goes underneath the black section so you'll need to remove the black section before the silver section. I've attached a photo below (not sure why it's rotated 180 degrees, no matter), hopefully this gives an idea of where the lugs are. I started off by the side of the search button which seemed to flex most.

20180831_153919.jpgMine was playing up exactly the same - the OK button was erratic. Having opened it up and cleaned it, it now appears to be working correctly. I did break the first lug, however given there are a number along the side it's not a big deal. I've also slightly damaged the finish on the side of the remote, that seems hard to avoid so I'd not recommend doing this unless you actually have a problem with the remote, mind, know you know where the lugs are you may get away with less damage.

Jeddy
 
You must log in or register to reply here.
Back
Top