Hi,
I've got a problem with my Humax FOX HDR T2. It will not boot up at all, it starts to boot then in the LED shows "CRASH - wait", then "Reboot in 10", followed by a countdown of 10 seconds, then "Reboot".
Yesterday, I was setting some automatic recordings using the rs.hummypkg.org.uk service, and I tried to record the film "Up", using the search criteria of "Up" (I know, I know...). As I should have predicted, this automatically picked up anything with up in the string and resulted in over 300 matches. I think this is responsible for the non-booting state it is now in.
I have tried the firmware versions listed at the bottom of this post, with no joy from any of them. I have disconnected the aerial, and network cable. I have removed the hard drive. It still will not boot. The "CRASH - wait" messages will only appear when i have just loaded CFW, it disappears when I load an official firmware but the same boot cycle behaviour remains.
I'm really tearing my hair out and am thinking that I've bricked my Humax that I've had and loved for a year and a half! Any help would be greatly appreciated.
Here are the firmwares I have tried loading, both CFW and official.
HDR-FOX T2 1.02.07
HDR_FOX_T2_1.01.09.zip
HDR_FOX_T2_1.01.09
HDR_FOX_T2_upgrade.hdf
HDR_FOX_T2_1.02.20_mod_2.20.zip
HDR_FOX_T2_1.02.32_mod_2.21.zip
HDR_FOX_T2_1.02.32_mod_2.21
HDR_FOX_T2_1.03.11_mod_2.22
HDR_FOX_T2_1.02.20_mod_2.20
HDR Official 1.02.32
HDR_FOX_T2_1.02.28.zip
HDR Official 1.02.29
HDR_FOX_T2_1.02.28
HDR_FOX_T2_1.02.20.zip
HDR_FOX_T2_1.02.20
HDR_FOX_T2_1.02.07.zip
Official 1.03.06
I've got a problem with my Humax FOX HDR T2. It will not boot up at all, it starts to boot then in the LED shows "CRASH - wait", then "Reboot in 10", followed by a countdown of 10 seconds, then "Reboot".
Yesterday, I was setting some automatic recordings using the rs.hummypkg.org.uk service, and I tried to record the film "Up", using the search criteria of "Up" (I know, I know...). As I should have predicted, this automatically picked up anything with up in the string and resulted in over 300 matches. I think this is responsible for the non-booting state it is now in.
I have tried the firmware versions listed at the bottom of this post, with no joy from any of them. I have disconnected the aerial, and network cable. I have removed the hard drive. It still will not boot. The "CRASH - wait" messages will only appear when i have just loaded CFW, it disappears when I load an official firmware but the same boot cycle behaviour remains.
I'm really tearing my hair out and am thinking that I've bricked my Humax that I've had and loved for a year and a half! Any help would be greatly appreciated.
Here are the firmwares I have tried loading, both CFW and official.
HDR-FOX T2 1.02.07
HDR_FOX_T2_1.01.09.zip
HDR_FOX_T2_1.01.09
HDR_FOX_T2_upgrade.hdf
HDR_FOX_T2_1.02.20_mod_2.20.zip
HDR_FOX_T2_1.02.32_mod_2.21.zip
HDR_FOX_T2_1.02.32_mod_2.21
HDR_FOX_T2_1.03.11_mod_2.22
HDR_FOX_T2_1.02.20_mod_2.20
HDR Official 1.02.32
HDR_FOX_T2_1.02.28.zip
HDR Official 1.02.29
HDR_FOX_T2_1.02.28
HDR_FOX_T2_1.02.20.zip
HDR_FOX_T2_1.02.20
HDR_FOX_T2_1.02.07.zip
Official 1.03.06