Just renewed my HDD

[Teessider]

I've had weeks of trouble box freezing restarting alsorts.I tried another HDD which helped but still failed the HDD test so I bought a new one.

My question is; is this normal for a new HDD: all these "old age" results
1 Raw_Read_Error_Rate POSR-- 425858 100 100 006 Pre-fail Always -
3 Spin_Up_Time PO---- 0 098 098 000 Pre-fail Always -
4 Start_Stop_Count -O--CK 12 100 100 020 Old_age Always -
5 Reallocated_Sector_Ct PO--CK 0 100 100 036 Pre-fail Always -
7 Seek_Error_Rate POSR-- 7825 100 253 030 Pre-fail Always -
9 Power_On_Hours -O--CK 0 100 100 000 Old_age Always -
10 Spin_Retry_Count PO--C- 0 100 100 097 Pre-fail Always -
12 Power_Cycle_Count -O--CK 6 100 100 020 Old_age Always -
184 End-to-End_Error -O--CK 0 100 100 099 Old_age Always -
187 Reported_Uncorrect -O--CK 0 100 100 000 Old_age Always -
188 Command_Timeout -O--CK 0 100 100 000 Old_age Always -
189 High_Fly_Writes -O-RCK 0 100 100 000 Old_age Always -
190 Airflow_Temperature_Cel -O---K 37 063 063 045 Old_age Always -
194 Temperature_Celsius -O---K 37 037 040 000 Old_age Always -
195 Hardware_ECC_Recovered -O-RC- 425858 100 100 000 Old_age Always -
197 Current_Pending_Sector -O--C- 0 100 100 000 Old_age Always -
198 Offline_Uncorrectable ----C- 0 100 100 000 Old_age Offline -
199 UDMA_CRC_Error_Count -OSRCK 0 200 200 000 Old_age Always -

 

[Ezra Pound]

It's just the terminology they use, It's not a problem, every perimeter has either type = pre-fail or type = old_age. If you want to get an idea of it's age check out the 'raw' value in line 9 Power_On_Hours, mine is currently 6799, your is Zero ! !

 

[Black Hole]

You need to look at the column titles associated with each parameter on the lines. From what I remember, the column which contains "Old_age" entries is a fault type rather than a flag for an actual fault. The real information is in the figures.

 

[Teessider]

Good stuff thanks to you both for the speedy answers its appreciated.