• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

No record 4000t

S

S.N HENDRY

New Member
Have a 4000t that was acting up. Dis full factory reset, seemingly successfully.
But is showing no recordings. ( I had set it a test of a detective series on ch 46(uk) of 6 consecutive episodes).
What's up with it?
 
If the 6 recordings were made before you did a factory reset then you've probably re-formatted the disk and lost the recordings.

If the recordings have vanished or can't be made after the reset then you've real problems. Sometimes the recordings list is blank on boot, but populates a short while later. I did once appear to lose all recordings and a complete power-down cured the problem. (Turn off at remote, wait for disk access to stop [can take a long time], turn power off at mains, leave for a few minutes and then power-up)

I'll assume that you made the recordings before the reset. Has the "acting up" been cured? (How was the Humax acting up?) Can you make and watch recordings now?
 
EEPhil said:
If the 6 recordings were made before you did a factory reset then you've probably re-formatted the disk and lost the recordings.

If the recordings have vanished or can't be made after the reset then you've real problems. Sometimes the recordings list is blank on boot, but populates a short while later. I did once appear to lose all recordings and a complete power-down cured the problem. (Turn off at remote, wait for disk access to stop [can take a long time], turn power off at mains, leave for a few minutes and then power-up)

I'll assume that you made the recordings before the reset. Has the "acting up" been cured? (How was the Humax acting up?) Can you make and watch recordings now?
Click to expand...
The acting up was 1) missing recordings. 2) loosing 'lock' on doing selections, the zoomies.
No, I put in the recordings after the full reset, as a test.
Checked today. It's showing no recordings. Hdd empty.
 
Have you tried channels other than 5Select (46)? (Don't try HD channels/U&Eden/Legend Xtra/TBN as these are on the same multiplex).
What are the signal strengths/quality on the channels you've tried to record?
Can you watch 5Select live on the Humax? What happens if you press record as you are watching? Does it record or do you get an error?
Do you have duplicates of channels at 800+?
S.N HENDRY said:
'lock' on doing selections, the zoomies.
Click to expand...
No idea what you mean.
 
You must log in or register to reply here.
Back
Top