MontysEvilTwin
Well-Known Member
I have a strange fault on a revised-hardware HDR-FOX. It is running 1.03.12 firmware (3.00 CFW). If it crashes and reboots, or if I reboot using Telnet or Web-If (I don't think it is a CFW related problem) the tuner does not work: no picture or sound plus 0% strength and quality on all channels. If I then power down using the remote or front panel button and turn it back on after the disk has spun down it is fine. The problem is 100% reproducible. If you switch on from standby it is fine and scheduled recordings in standby are fine. I have done a factory reset (without disk format) and have run the CFW fixdisk procedure. No change. Out of interest, I installed 1.02.32 firmware. This, as expected, completely disabled the tuner. Reinstalling 1.03.12 made the tuner work again but the issue persists. Any ideas?