humax# smartctl -a /dev/sda
smartctl 6.4 2015-06-04 r4109 [7405b0-smp-linux-2.6.18-7.1] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Video 3.5 HDD
Device Model: ST1000VM002-1CT162
Serial Number: S1G1M23H
LU WWN Device Id: 5 000c50 0616fadfa
Firmware Version: SC23
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Mar 28 20:25:07 2017 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 97) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10b9) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 095 095 006 Pre-fail Always - 169722802
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5389
5 Reallocated_Sector_Ct 0x0033 094 094 036 Pre-fail Always - 7872
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 781365764
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 15984
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5389
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 061 061 000 Old_age Always - 39
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 38655295497
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 212
190 Airflow_Temperature_Cel 0x0022 063 038 045 Old_age Always In_the_past 37 (Min/Max 37/48 #81)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 5387
193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 5389
194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 21 0 0 0)
197 Current_Pending_Sector 0x0012 097 097 000 Old_age Always - 503
198 Offline_Uncorrectable 0x0010 097 097 000 Old_age Offline - 503
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 249 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 249 occurred at disk power-on lifetime: 15982 hours (665 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 01 ff ff ff ef 00 05:27:41.882 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:41.857 WRITE SECTORS(S) EXT
ec 00 00 26 80 cc a0 00 05:27:41.842 IDENTIFY DEVICE
24 00 01 ff ff ff ef 00 05:27:41.191 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:41.165 WRITE SECTORS(S) EXT
Error 248 occurred at disk power-on lifetime: 15982 hours (665 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 01 ff ff ff ef 00 05:27:41.191 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:41.165 WRITE SECTORS(S) EXT
ec 00 00 25 80 cc a0 00 05:27:41.150 IDENTIFY DEVICE
24 00 01 ff ff ff ef 00 05:27:40.499 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:40.473 WRITE SECTORS(S) EXT
Error 247 occurred at disk power-on lifetime: 15982 hours (665 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 01 ff ff ff ef 00 05:27:40.499 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:40.473 WRITE SECTORS(S) EXT
ec 00 00 24 80 cc a0 00 05:27:40.458 IDENTIFY DEVICE
24 00 01 ff ff ff ef 00 05:27:39.797 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:39.771 WRITE SECTORS(S) EXT
Error 246 occurred at disk power-on lifetime: 15982 hours (665 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 01 ff ff ff ef 00 05:27:39.797 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:39.771 WRITE SECTORS(S) EXT
ec 00 00 23 80 cc a0 00 05:27:39.756 IDENTIFY DEVICE
24 00 01 ff ff ff ef 00 05:27:39.099 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:39.073 WRITE SECTORS(S) EXT
Error 245 occurred at disk power-on lifetime: 15982 hours (665 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 01 ff ff ff ef 00 05:27:39.099 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:39.073 WRITE SECTORS(S) EXT
ec 00 00 22 80 cc a0 00 05:27:39.024 IDENTIFY DEVICE
24 00 01 ff ff ff ef 00 05:27:38.360 READ SECTOR(S) EXT
34 00 01 ff ff ff ef 00 05:27:38.334 WRITE SECTORS(S) EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 15983 -
# 2 Short offline Completed without error 00% 15983 -
# 3 Selective offline Completed without error 00% 15983 -
# 4 Selective offline Completed: read failure 90% 15982 1523659536
# 5 Selective offline Completed: read failure 90% 15982 1523613728
# 6 Selective offline Completed: read failure 90% 15982 1523351584
# 7 Selective offline Completed: read failure 90% 15982 1523089440
# 8 Selective offline Completed: read failure 90% 15982 1521778720
# 9 Selective offline Completed: read failure 90% 15982 1521516576
#10 Selective offline Completed: read failure 90% 15982 1521254432
#11 Selective offline Completed: read failure 90% 15982 1519943712
#12 Selective offline Completed: read failure 90% 15982 1519681568
#13 Selective offline Completed: read failure 90% 15982 1519419424
#14 Selective offline Completed: read failure 90% 15982 1519157280
#15 Selective offline Completed: read failure 90% 15982 1517846560
#16 Selective offline Completed: read failure 90% 15982 1517584416
#17 Selective offline Completed: read failure 90% 15982 1517322272
#18 Selective offline Completed: read failure 90% 15982 1516011552
#19 Selective offline Completed: read failure 90% 15982 1515749408
#20 Selective offline Completed: read failure 90% 15982 1514176544
#21 Selective offline Completed: read failure 90% 15982 1513914424
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 1523659536 1953525167 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
