PVR-9200T Data Recovery

theroflraptor

New Member
Hi all,

I’m trying to recover recordings from the hard drive of an old PVR-9200T.

I've already successfully created an image of the 320GB drive using ddrescue, but I’m looking for a way to extract the recordings.

I believe HumaxRW should allow me to do this on Ubuntu, but the only package I've found anywhere online is humaxrw_1.15_mipsel.opk, which I haven't been able to get working despite trying the HDR-Fox T2 uClibc runtime and running it under qemu-mipsel.

I've found forum posts referencing native Linux versions of HumaxRW, so was wondering if anyone still has a copy of the native Linux x86 build or source code? Alternatively, is there any other known working utility that can read a raw disk image from a PVR-9200T and extract the .ts files?

Really appreciate any help!
 
@theroflraptor Did you solve your problem? Sorry for the delay but I have just managed to find my copy of HummyReadFiles v 094, which IIRC was what I used to grab recordings of my (now deceased) PVR-9200T. Most weeks had me removing the HDD from the box and plugging it into my PC, using VideoRedo to turn the .ts files into mp4 files and cut the adverts before burning them onto DVD for the kids.
You would, however, need Windows. I suggest running up a VM in Linux and installing XP, so long as you can get pass-through of the HDD interface or get it to report the image as one.
 
Last edited:
@theroflraptor Did you solve your problem? Sorry for the delay but I have just managed to find my copy of HummyReadFiles v 094, which IIRC was what I used to grab recordings of my (now deceased) PVR-9200T. Most weeks had me removing the HDD from the box and plugging it into my PC, using VideoRedo to turn the .ts files into mp4 files and cut the adverts before burning them onto DVD for the kids.
You would, however, need Windows. I suggest running up a VM in Linux and installing XP, so long as you can get pass-through of the HDD interface or get it to report the image as one.
Yes I did thank you! The HumaxRW build the other user shared worked a treat.
 
Hi,sorry to Hijack the thread somewhat. I'm also clearing out a bunch of old Humax pvrs 9150, 9200 and two 9300s, although I'm going to keep one of the 9300's for legacy reasons.

I'm taking out all the HDDs, all but one are SATA - So I'm hoping to read and convert and just save the odd recording off the HDs. The rest of the bare chassis will goto electrical recycling.

But now I'm looking for a Windows version of HumaxRW - please can anyone help?

(NB not Linux or source code etc, my IT skills aren't current enough to know what to do with these.
 
But now I'm looking for a Windows version of HumaxRW - please can anyone help?
Are you sure that is worth pursuing? The windows version of HumaxRW is only compatible with 32 bit computers, therefore you would need a 32 bit computer.
 
Are you sure that is worth pursuing? The windows version of HumaxRW is only compatible with 32 bit computers, therefore you would need a 32 bit computer.
What are my other options? (I have windows 10, 64-bit version)

(I am considering trying to rebuild an old laptop to Linux Mint, but it's not done yet, and a lot of the command -line level stuff puts me off.)
 
I'm using win10. I'm going to give it a try....unless someone more knowledgeable can tell me it won't work. (I don't really understand why...)
Martin has said it works for him so it should work.

I thought there had been some threads on the defunct myhumax forum that appeared to have reasonable attempts at using 64 bit pcs with window 10 that could not get humaxrw to work.
But if Martin says that humaxrw can work on a 32bit pc with windows then I'm sure he is correct. Martin was very helpful concerning humaxrw on myhumax. When myhumax announced it was closing down my second thought was the high number of those quality posts of Martin's that would be lost. For humaxrw there were a lot of old potentiall useful posts on humaxrw than anywhere else.
 
Hi! I specifically signed up here to post this :)

I see some of you still want to extract recordings out of your Humax boxes, but the software won't work on recent operating systems and hardware. I had the same problem, I'm running a Mac with Apple Silicon, so there's simply no easy way to run x86 Windows applications on this machine (and I didn't manage to find the Linux version). So I decided to port HumaxRW to Python (using AI to reverse-engineer the original version), which allows it run on basically everything.

I'm not allowed to post external links since I'm a new user, so here's the link without the link (oh and looks like it made it a link anyway)...


I successfully extracted all recordings from my mom's PVR-9200T using it.

I haven't tested it on Windows or Linux, but Linux should work just like on the Mac, and for Windows I think you just need to figure out what the raw device path is (and it probably needs admin access).

It's a good idea to take a full dump of the whole hdd using dd/ddrescue, so you don't need to continuously access the old hdd which is likely failing by now. That's what I did on my Mac, and ddrescue was invaluable because it can continue from the previous point of failure. I had to restart it ~10-20 times in the beginning because it just stalled. Apparently there's something wrong at the beginning of the disk, but once it got past that it went in one run, 160gb in just under an hour.

Oh and obviously you need to take the HDD out and plug it directly into the computer. I used the case of a Lacie Porsche external USB drive to connect it to my Mac.
 
Last edited:
I recovered files from a Humax PVR-9300T in March 2013. I seem to remember running humaxrw under Linux with Linux running on my Windows 7 PC from a bootable DVD.
I still have humaxrw-1.14-win32.zip and humaxrw-1.14.gz if anyone wants them.
 

Attachments

I still have humaxrw-1.14-win32.zip and humaxrw-1.14.gz if anyone wants them.
They are both old versions. The latest (1.15) version of the latter is in post #2 in this very thread. I also have 1.15_win32.
1.14_win32 was in post #9.
Did you bother reading back?
 
I thought it would be interesting to compare the original humaxrw-1.15-win32 with the new Python humaxrw.py, running on Windows 11 or Windows 7 (both 64 bit). I had problems with both the original and Python programs.

The first problem I had with the original humaxrw was that it reported "116.av: Permission denied" while copying one of the av files. I suspect it was an error reading from the disk. So I used Linux ddrescue to produce a disk image file, then humaxrw ran without errors and the file produced from 116.av played OK.

The second problem I had with the original humaxrw was that VLC could not play 6 of the files it produced, but the same files produced by the Python program played OK. The Python program includes a function called ts_align which it says "Skip leading padding and return packet-aligned payload". It seems that VLC wants complete packets at the start of a ts file. I have produced a little C program which checks ts files and produces aligned tsa files when needed. I've attached ts_align.zip containing the source code and a Windows 32-bit executable.

I had several problems with the new Python humaxrw.py, some of which I have fixed:
  • Files of more than 4 GB were 4 GB shorter than they should be. The directory entry contains a 64-bit length, but only the bottom 32 bits were used (fixed).
  • Some of the files contained the correct program but had the wrong name. It finds the names from the epg files, but these contain two or three names. The correct name is usually the first, but in some cases it is the second. I have fixed this, but I can't be sure it will work for all cases.
  • The ts_align function may drop part of a packet at the end of the first chunk (fixed).
  • As the progress output varies in length, it leaves some unwanted characters (fixed).
  • The elu files were assumed to be contiguous, rather than following the FAT chain (fixed).
  • The byte order needs to be swapped for elu and epg files (fixed).
  • The file names don't include date and time which makes it impossible to watch a series in the correct order. To fix this would require using the record list (which would also fix the wrong name problem). I don't know enough Python to attempt this.
  • One of my two disks had file 42.av with size 295 GB (which explains why the disk was nearly full with only 78 recordings). I can't delete this file because it is not in the record list. This one file could take about 12 hours to process, so perhaps the program should limit the size of files (not fixed).
I've attached humaxrwmod.zip containing my modified Python code plus the original Python code to allow comparison.
 

Attachments

Back
Top