• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

Unresponsive box

A

Ara_yo

New Member
It seems that my hdr-fox T2 has packed up. I have tried to reinstalling the latest custom firmware again, but it only downloads it and it reboots straight away. I can't connect from my pc. I think it has died. Is there a way I can extract the hard drive and watch the recordings on my PC? I can't remember if I enabled decryption :(
 
Last edited:
A lot more detail of symptom is needed?
EXACTLY what are you seeing

I you can install CF then it is not totally dead?
Does it boot up with the disk disconnected?
 
I see the Humax logo and loader version, then the green screen and then the signal gets lost. On the rs.hpkg.tv/, all the channel info is gone and keep getting "the following programmes failed to record". The machine seems to wake up as per programmed but then it doesn't record.

The CF doesn't really install, it only says downloading for about 1 minute, then asks to reboot but nothing happens afterwards.

I am not asking for help to repair it. I am not very good at this. Just wanted to know if there is a way I could see the recordings on my PC. If I can't, I'll try to remeber what they were and try catch up.

Also, I am happy to give it away for spare parts to anyone who can pick it up from South London.
 
Last edited:
Ara_yo said:
I think it has died. Is there a way I can extract the hard drive and watch the recordings on my PC?:(
Click to expand...
Yes to that question.
A key part will be decrypting the recordings. For searching for threads on how to do this when the HDR-FOX T2 is inoperable it has been referred to as "off-line decryption" on this forum.

A couple of threads are:

Beta - Offline decryption utility

So far as I can see, there has been no formal migration of stripts out of beta Where are you looking and what defines "formal"? yet the mainstream WebIF is (I think) dependent on it. It is. And stripts isn't in beta and hasn't been for a long time. Perusing the WebIF package management, it...
hummy.tv hummy.tv

Windows version of offline decryption (HFODU)

As mentioned on the beta offline decryption thread https://hummy.tv/forum/threads/offline-decryption-utility.8676/ I was looking into a windows version of a decryption only utility. I have had this working for a while now but haven't got around to writing up the full help. The problem is I have...
hummy.tv hummy.tv

For details of the decryption key see:
wiki.hummy.tv

Custom Firmware Package Notes

wiki.hummy.tv wiki.hummy.tv
 
Talking the disk out of the Humax is trivial - no skill needed other than a simple screwdriver!
To connect disk to a PC is also simple but you would need to purchase a Hard disk caddy or cables o connect it to the PC's USB sockets
You would then to decrypt the recordings (if not already decrypted) as decribed above.
Once decryped they can be viewed using VLC.
 
MymsMan said:
To connect disk to a PC is also simple
Click to expand...
Well it's not, because to most people a PC is a Windows PC - "there aren't any others, are there?" - and you aren't going to read a Linux ext3 disk format on such a thing easily.
 
Luke said:
Yes to that question.
A key part will be decrypting the recordings. For searching for threads on how to do this when the HDR-FOX T2 is inoperable it has been referred to as "off-line decryption" on this forum.

A couple of threads are:

Beta - Offline decryption utility

So far as I can see, there has been no formal migration of stripts out of beta Where are you looking and what defines "formal"? yet the mainstream WebIF is (I think) dependent on it. It is. And stripts isn't in beta and hasn't been for a long time. Perusing the WebIF package management, it...
hummy.tv hummy.tv

Windows version of offline decryption (HFODU)

As mentioned on the beta offline decryption thread https://hummy.tv/forum/threads/offline-decryption-utility.8676/ I was looking into a windows version of a decryption only utility. I have had this working for a while now but haven't got around to writing up the full help. The problem is I have...
hummy.tv hummy.tv

For details of the decryption key see:
wiki.hummy.tv

Custom Firmware Package Notes

wiki.hummy.tv wiki.hummy.tv
Click to expand...
Thank you. That's very helpful. I'll try that
 
MymsMan said:
Talking the disk out of the Humax is trivial - no skill needed other than a simple screwdriver!
To connect disk to a PC is also simple but you would need to purchase a Hard disk caddy or cables o connect it to the PC's USB sockets
You would then to decrypt the recordings (if not already decrypted) as decribed above.
Once decryped they can be viewed using VLC.
Click to expand...
Brilliant! Thank you. I already have a disk caddy
 
Ara_yo said:
I am willing to open the box. I have a harddriver reader
Click to expand...
OK, but you will still have a few hoops to jump through. The process is explained in this post:

Rescuing Recordings from a Dead HDR-FOX

If your recordings are already decrypted, then once you gain access to the Ext3 format of the HDD you will be able to play them (using VLC) without further complication. Otherwise you will have to decrypt as described.

Gaining access to Ext3 means either booting Linux or installing an Ext3 reader accessory or driver in Windows, although it might be that Win11 has Ext3 capability built-in.

I'm not familiar with "live booting" a modern PC fitted with a Trusted Security Module, I don't know whether you can still just plug in a Linux installation on USB and boot from it – perhaps somebody can comment? The reason this might be an issue is because a live boot bypasses any security layers Windows has established and enables direct access to any drive on the system, so system admins commonly turn off USB booting in the BIOS and lock it down. Windows 11 is so nannying that it wouldn't surprise me if that is now as standard.
 
Last edited:
Black Hole said:
I'm not familiar with "live booting" a modern PC fitted with a Trusted Security Module, I don't know whether you can still just plug in a Linux installation on USB and boot from it – perhaps somebody can comment?
Click to expand...
I think you need to use rufus (or similar software) to organise the USB stick in the required format. See https://rufus.ie/en/
I used it to install a dual boot system (Windows 11 and Debian 11) on a modern laptop.
 
You must log in or register to reply here.
Back
Top