Update from android 9 to 14 - problem

I mostly use the Kodi app, sometimes VLC. Have you tried the Kodi app, does it work as VLC does for you?
Update 01.00.60.B

As you requested:
I installed Kodi on the Aura to test it and set pass-through and 5:1 sound in KODI , stuck in an NTFS usb stick and it picked it up ok and played a .MKV Film with sound.
The sound output codec reaching the amp is not what the film has internally, but that is part of the problem being addressed by Humax currently, pass-through is being processed before its passed (My opinion).

I had another glitch this morning firing up for your test, the Aura had issues linking up to the TV , cycling through HDMI , I did a simple Aura stop and restart and the screen went grey.
I did a long hold on the power button and the screen came up with the do you want to shut down which I cancelled as I now had control back.
This has happened before on this update.
So it is not perfect and may differ on other boxes to complicate things.
But NTFS in read-only mode does work.
 
I'm still wondering if the Aura is shutting down properly?
I recorded a couple of programmes last night, recording had started when I turned the box off but as I found with the .59 update, I don't turn it fully off like I used to (holding the power button and shut down) as it literally shuts the box completely off and stops any recordings taking place, so I now press the power button on the remote once but I heard it whirring this morning again, which means it is on.
I'm not recording anything for a good few hours later on today.
Should it be on like this? I'm wondering if after the recordings had ended it did not turn itself off?
 
Last edited:
I'm having sound issues aswel,some days have sound and some days no sound... would replacing the hdmi cables fix the issue??
Frankly, no.

Yes, OK, HDMI is digital so it is either all there or all not with no in-between, and you might therefore think that if the audio comes and goes there could be a connection problem affecting the audio link... except there is no separate audio link. Audio information is carried within the video link, so if there was a connection problem affecting the audio, it would also affect the video.
 
Can you tell me what percentage of people have a problem with the Android update? Have you done a scientific survey? Or is that your subjective opinion? I have updated both my Humax Auras and all I can relate is that they have transformed my boxes into something much more stable. It’s not about having ’faith’ in Humax it’s about installing updated new software with improvements. Stay with Android 9 if you really find it stable.
Use your own eyes, this thread alone supports what I said. You are starting to look like a Humax shill in a damage limitation role.
 
Luxury! Unless I'm mistaken the U player is only streaming mono sound on the newer offerings - it says two channel, but it's mono. (eg. HIGABMNFY - new version, not on BBC, in stereo on Freeview, mono on U player)
You tube 5:1 surround demos caught me out and only had 2 channels or it was mangled.
 
You tube 5:1 surround demos caught me out and only had 2 channels or it was mangled.
Are you playing them directly on the YT app on the Aura or have you used yt-dlp to download the file? yt-dlp -F [URL] gives a list of available video and audio formats. You  might be able to pick 5.1 from there.
 
Are you playing them directly on the YT app on the Aura or have you used yt-dlp to download the file? yt-dlp -F [URL] gives a list of available video and audio formats. You  might be able to pick 5.1 from there.
Both and other downloaders often using the same core build.
I recently used a Dolby digital room balancer video to test the current issues and it messed up the channels.
When I checked it in media info it was AAC not AC3 and 2 channels were swapped, the codec info said Google.
I realised it had been reprocessed, I remapped the channels correctly.
Dolby channel layout and AAC have a different scheme which can be a pain if not spotted .
 
Are you playing them directly on the YT app on the Aura or have you used yt-dlp to download the file? yt-dlp -F [URL] gives a list of available video and audio formats. You  might be able to pick 5.1 from there.
Seems like there is a huge cyber attack world wide going on hang on to your hats 178 big players hit.
 
I've just used yt-dlp to download what is supposedly a 5.1 test, it isn't, it is 2 channel stereo. Looks like YT doesn't support 5.1, unless there are additional audio tracks available that I can't see - probably at a premium rate. Not an Aura problem then.
 
According to this article YT does support 5.1 and 7.1 but only for upload then converts it to stereo for playback....................................

I have through my TV been watching 5.1 Audio Test videos from You Tube (not via the Aura as there is a problem with the Auras audio passthrough at the moment), with the TV set for audio passthrough I was getting 5.1 audio Dolby Digital + via my AVR.
 
I have through my TV been watching 5.1 Audio Test videos from You Tube (not via the Aura as there is a problem with the Auras audio passthrough at the moment), with the TV set for audio passthrough I was getting 5.1 audio Dolby Digital + via my AVR.
I have Bake off on CH4sd on and my Denon AVR says it is Dolby surround and playing through 7.1 speakers but the input shows as just front left and right
 
I have Bake off on CH4sd on and my Denon AVR says it is Dolby surround and playing through 7.1 speakers but the input shows as just front left and right
The Bake Off is broadcast in Stereo, you should be able to set the Denon to Auto so it detects the input signal and outputs accordingly
So 2.0 in 2.0 out 5.1 in 5.1 out etcetera
 
The Bake Off is broadcast in Stereo, you should be able to set the Denon to Auto so it detects the input signal and outputs accordingly
So 2.0 in 2.0 out 5.1 in 5.1 out etcetera
I know it is in stereo that was my point. My AVR is on Dolby Audio DSur so it converts stereo into a pseudo 7.1, speech mainly from center speaker and effects from rear which I was considering is what you may be thinking is 5.1 on your set up but from a stereo source.
 
I know it is in stereo that was my point. My AVR is on Dolby Audio DSur so it converts stereo into a pseudo 7.1, speech mainly from center speaker and effects from rear which I was considering is what you may be thinking is 5.1 on your set up but from a stereo source.
No, as stated audio passthrough is on on my TV, the AVR is set to Auto so it will detect the source and output it accordingly.
There are You Tube videos I found where you can select Surround Sound 5.1

Have a look at this one,

Get it on your TV, click on the Settings icon on the right and make sure Audio is set for Surroud Sound 5.1.

I've got to go home for my tea now, but I might
be able to come out and play tomorrow.
 
Back
Top