After many months of working fine, Virtual-Disk2 that I use with Network Shares Automount has suddenly stopped working. When I checked the virtual-disk log it show an error - can't open '/etc/init.d/include.sh' . I have checked in init.d and that file does not exist. I have another Humax and that does have an include.sh. First thought was to copy it over but the init.d directory only has write permissions for root. If I ever did know how to gain root access through telnet then I have forgotten it. I have checked through the Custom Firmware options for anything that might help but failed to spot anything. Any suggestions would be much appreciated.
-
The forum software that supports hummy.tv has been upgraded to XenForo 2.3!
Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.
Virtual Disk2 stopped working - can't open include.sh
- Thread starter geoffd
- Start date
Black Hole
May contain traces of nut
WebIF >> Diagnostics >> Diagnostic >> fix-flash-packages
Other than that, uninstall and reinstall.
Other than that, uninstall and reinstall.
Ezra Pound
Well-Known Member
Are you referring to write permissions (the 'w') here ? :-
Code:
Humax1# ls -dal init.d
drwxr-xr-x 2 root root 352 Apr 26 2017 init.d
Code:
Humax1# id
uid=0(root) gid=0(root) groups=0(root)
Humax1#
Well yes, but
/etc/init.d/ is in the read-only flash.Thanks. It is the custom firmware version that is the problem. The Humax with the problem is running 3.03 and the one that's OK is running 3.12. I realise now that I updated packages on both and I must now have a version of virtual disk that depends on 3.11 or above.
I have to admit I had forgotten about the need to update the custom firmware. (embarrassed) I will report back when updated.
I have to admit I had forgotten about the need to update the custom firmware. (embarrassed) I will report back when updated.