• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

worst thing I have ever bought!

RS-MAN

RS-MAN

New Member
Hi All,

Sorry to start on a bad note, but I have had nothing but trouble with this unit since I bought it.

First was hand-shaking, I had to make sure the TV wasn't on before I switched my Humax box on. If I did I had to unplug everything from the back of the box to re-start the unit. Humax said it was the TV, which was at fault, as it was an old plasma. I believed Humax.

Second: the second signal strength indicator didn't work, which isn't too bad if one knew about the problem, having tried 3 cables I contacted Humax. It was a known problem and would be fixed with the next software update. It was, and so was the hand-shaking problem. :)

Everything worked for the next few months until the odd programme didn't record. it then stopped working altogether it froze on BBC News, I contacted Humax who talked me through a system, which would re-boot it. that fixed it for a few days.

Now I can't record anything! I have formatted the hard drive a few times but I still can't record anything. What am I to do, I have sadly had the unit too long to get my money back!

Would I recommend Humax - no, never.

So my options are to send the unit back to Humax or the shop where I bought it from.

Would a software update fix it, I see there is a beta available, should I use it or has anyone else got any ideas!

Sorry I didn't start this forum on a 'good' note (I am not usually this negative - honest)

I would appreciate any help.

Kind regards

Shaun
 
I have tried the 'beta' firmware, nothing, however, I have noticed a pattern emerging; it records for 2 minutes. it took a while to notice, but further testing reviled a 2 minute record time. Has anyone else come across this?

I think it's time I took it back!
 
The Humax returns system is very good, I would give that a try; sadly I suppose somebody must get a "Monday morning" unit occasionally.
 
keithatrochdale said:
The Humax returns system is very good, I would give that a try; sadly I suppose somebody must get a "Monday morning" unit occasionally.
Click to expand...
Thanks for replying I tried the firmware up-date and re-formatted again. This time a total fail, when I say total fail, it shows the programme but a warning triangle saying 'Failed' and I left the unit on.

Kind regards

Shaun
 
RS-MAN said:
I have tried the 'beta' firmware, nothing, however, I have noticed a pattern emerging; it records for 2 minutes. it took a while to notice, but further testing reviled a 2 minute record time. Has anyone else come across this?

I think it's time I took it back!
Click to expand...

Not aware of any beta firmware released for the hdr1000/1010 models. There is a system reset .hdf file which basically just does the same as a reset to factory defaults. New units do have a later firmware but afaik it's never been released or transmitted OTA. The second tuner not indicating a signal isn't really an issue. The second tuner is powered off if not required (presumably to save power). If you start a recording thus forcing the second tuner to be powered you will see the signal strength for the two transponders in use.

I would give Humax a ring. Mine works without problems.
 
Hi All,

I called Humax

And they said I had to return it to the store where I bought it, but first try a hard drive format. I have just done this so my son isn't happy as he has lost off of his Scooby Doo programmes. I am recording now so we will see if this has cured it - lets hope so.

Kind regards

Shaun

PS

The unit was running the second fireware release, as you know it has You Tube on, the firmware now is: UKSFAA 1.00.37

PPS
Recorded the last 7 minutes of Scooby Doo so it must be working :)

Just had a look and I have recorded a full Scooby Doo, he will be pleased. Looks like it works! It's a pity one can't move one's recordings before a hard drive format...
 
RS-MAN said:
Hi All,

I called Humax

And they said I had to return it to the store where I bought it, but first try a hard drive format. I have just done this so my son isn't happy as he has lost off of his Scooby Doo programmes. I am recording now so we will see if this has cured it - lets hope so.

Kind regards

Shaun

PS

The unit was running the second fireware release, as you know it has You Tube on, the firmware now is: UKSFAA 1.00.37

PPS
Recorded the last 7 minutes of Scooby Doo so it must be working :)

Just had a look and I have recorded a full Scooby Doo, he will be pleased. Looks like it works! It's a pity one can't move one's recordings before a hard drive format...
Click to expand...

1.00.37 isn't a beta it's the last update to be transmitted ota. New boxes have 1.00.40 firmware, there doesn't seem to be any significant difference to 1.00.37.
 
You must log in or register to reply here.
Back
Top