Hi everybody,
Finally got myself an Aura and after a week I have it set up to do pretty much everything that the Fox T2 did. Very impressive machine.
Except that I used to be able to change the titles on recordings and I can’t find any way to do that on the Aura. Am I missing something obvious?
Apologies for my lack of understanding of search methods. Anyway, the fan package is now running at 40% min, and the internal temps are about the same.
Quite honestly I’ve never noticed fan noise, and the Humax sits on a shelf at head height about 3 feet behind my chair.
Thanks for taking the time to do that. Looks like I shouldn’t be concerned about the hot spot.
I don’t think the fan would have much impact on the tuner temp but I’m curious about this “fan package”. I installed custom firmware 1.03.12 FW 3.10 in 2016 to solve the destructive delete problem. Do...
Just noticed the back panel immediately around the RF sockets (V1) is very warm, almost uncomfortable to touch. Had a look inside and no signs of scorching. Inside is very clean - no dust buildup.
I have no means of measuring the temp but it seems excessive. The recorder is working normally.
Sorry, yes. Recording HD on both channels.
Both tuners seem to be functioning Ok.
There was a major retune in September to prepare for 5G services, and I notice that group T wideband aerials are now recommended to receive HD channels. That might be the problem since my aerial is ancient...
Hi everybody,
For about a month now I’ve been having problems recording BBC2 and BBC4 simultaneously. BBC2 records ok but during the recording, if I change channels to BBC4 I get a “weak or no signal message” on screen. There’s no way to check the strength while recording because it’s greyed...
apologies in advance if this is not in correct format
Attributes
ID Name Flags Raw Value Value Worst Threshold Life Left Notes
1 Raw_Read_Error_Rate POSR-- 197766722 082 064 006 -
3 Spin_Up_Time PO---- 0 097 097 000 -
4 Start_Stop_Count -O--CK 276 100 100 020 100% -
5 Reallocated_Sector_Ct...
Hi all.
I suffered from the problem of constant delete but with the help of a few good people on this forum was able to install custom firmware and then replace the HD. Everything was back to normal except that every so often when I play back a recording I experience freezeframe/picture breakup...
Thanks to everyone who took the time to reply. I finally installed the custom firmware and it looks like the hard disc is beyond repair, so I am considering fitting a new one. From reading other threads this seems to be straightforward - I just fit the disc and then format it, right?
Thanks again.
Hello, I have just run fix-disk and this is the complete read-out. Can someone advise me what I should/can do next (if anything). Any help gratefully received. Should I just go and pour myself a large gin?
(You'll see a line with product ID - I've had to amend the URL to read DOT (I'm a...
Apologies - that wasn't very clear. I meant that I downloaded Humax firmware 1.01.09 as per the instructions on this site for dealing with the destructive delete problem and tried several times to install it. I tried both USB ports several times but it would not install. The Humax remains in...
Thanks. Sorry, I should have said that I've tried to install the custom firmware several times with no success. I assume this is a hard disc problem. Would replacing it be the answer?
Hi everybody,
Finally got myself an Aura and after a week I have it set up to do pretty much everything that the Fox T2 did. Very impressive machine.
Except that I used to be able to change the titles on recordings and I can’t find any way to do that on the Aura. Am I missing something obvious?
Apologies for my lack of understanding of search methods. Anyway, the fan package is now running at 40% min, and the internal temps are about the same.
Quite honestly I’ve never noticed fan noise, and the Humax sits on a shelf at head height about 3 feet behind my chair.
Thanks for taking the time to do that. Looks like I shouldn’t be concerned about the hot spot.
I don’t think the fan would have much impact on the tuner temp but I’m curious about this “fan package”. I installed custom firmware 1.03.12 FW 3.10 in 2016 to solve the destructive delete problem. Do...
Just noticed the back panel immediately around the RF sockets (V1) is very warm, almost uncomfortable to touch. Had a look inside and no signs of scorching. Inside is very clean - no dust buildup.
I have no means of measuring the temp but it seems excessive. The recorder is working normally.
Sorry, yes. Recording HD on both channels.
Both tuners seem to be functioning Ok.
There was a major retune in September to prepare for 5G services, and I notice that group T wideband aerials are now recommended to receive HD channels. That might be the problem since my aerial is ancient...
Hi everybody,
For about a month now I’ve been having problems recording BBC2 and BBC4 simultaneously. BBC2 records ok but during the recording, if I change channels to BBC4 I get a “weak or no signal message” on screen. There’s no way to check the strength while recording because it’s greyed...
apologies in advance if this is not in correct format
Attributes
ID Name Flags Raw Value Value Worst Threshold Life Left Notes
1 Raw_Read_Error_Rate POSR-- 197766722 082 064 006 -
3 Spin_Up_Time PO---- 0 097 097 000 -
4 Start_Stop_Count -O--CK 276 100 100 020 100% -
5 Reallocated_Sector_Ct...
Hi all.
I suffered from the problem of constant delete but with the help of a few good people on this forum was able to install custom firmware and then replace the HD. Everything was back to normal except that every so often when I play back a recording I experience freezeframe/picture breakup...
Thanks to everyone who took the time to reply. I finally installed the custom firmware and it looks like the hard disc is beyond repair, so I am considering fitting a new one. From reading other threads this seems to be straightforward - I just fit the disc and then format it, right?
Thanks again.
Hello, I have just run fix-disk and this is the complete read-out. Can someone advise me what I should/can do next (if anything). Any help gratefully received. Should I just go and pour myself a large gin?
(You'll see a line with product ID - I've had to amend the URL to read DOT (I'm a...
Apologies - that wasn't very clear. I meant that I downloaded Humax firmware 1.01.09 as per the instructions on this site for dealing with the destructive delete problem and tried several times to install it. I tried both USB ports several times but it would not install. The Humax remains in...
Thanks. Sorry, I should have said that I've tried to install the custom firmware several times with no success. I assume this is a hard disc problem. Would replacing it be the answer?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.