I've just installed the customised firmware on a new HDR-FOX T2 (SW Version 1.2.29), but I'm unable to connect to the Hummy using a web browser. So far, I've tried the following:
1. Checked that "Cust FW 2.14" is displayed on startup.
2. Pinged. No problem.
3. Connected via Telnet. No problem.
4. Tried a forced reinstall of the web interface, with the following result:
huxnax$ opkg install webif --force-reinstall
No packages removed.
Unknown package ‘webif’.
Collected errors:
* make directory: Cannot create directory ‘/mod/var/opkg’: Read—only file system
* make directory: Cannot create directory ‘/modfvar/opkg’: Read—only file system.
* make_directory: Cannot create directory ‘Jmodfvar/opkg’: Read-only file system
* opkg_install_cmd: Cannot install package webif.
* opkg finalize intercepts: Failed to open dir : No such file or directory.
* rmr: Failed to open dir : No such file or directory.
* m_rj Failed to open dir : No such file or directory.
Presumably it's not surprising that the removal stage failed, since I have not yet been able to get as far as installing the full web interface. But I would have thought that the installation should have worked.
5. Tried removing the customised firmware, in order to try a fresh installation, with the following result:
rmi: cannot remove ‘/mod/bin’: Read—only file system
rmi: cannot remove ‘/mod/boot’: Read—only file system
And now I've run out of ideas. Any suggestions would be gratefully received.
1. Checked that "Cust FW 2.14" is displayed on startup.
2. Pinged. No problem.
3. Connected via Telnet. No problem.
4. Tried a forced reinstall of the web interface, with the following result:
huxnax$ opkg install webif --force-reinstall
No packages removed.
Unknown package ‘webif’.
Collected errors:
* make directory: Cannot create directory ‘/mod/var/opkg’: Read—only file system
* make directory: Cannot create directory ‘/modfvar/opkg’: Read—only file system.
* make_directory: Cannot create directory ‘Jmodfvar/opkg’: Read-only file system
* opkg_install_cmd: Cannot install package webif.
* opkg finalize intercepts: Failed to open dir : No such file or directory.
* rmr: Failed to open dir : No such file or directory.
* m_rj Failed to open dir : No such file or directory.
Presumably it's not surprising that the removal stage failed, since I have not yet been able to get as far as installing the full web interface. But I would have thought that the installation should have worked.
5. Tried removing the customised firmware, in order to try a fresh installation, with the following result:
rmi: cannot remove ‘/mod/bin’: Read—only file system
rmi: cannot remove ‘/mod/boot’: Read—only file system
And now I've run out of ideas. Any suggestions would be gratefully received.